DO THIS... | THIS HAPPENS... |
The PROBE TEMP Indicator Light will come on and the Drsplay will show “F”
4.Touch PROBE TEMP.
The Display will show the numbers you touched in the order you touched them. This example shows a final cooked temperature of
II a bout 140°F
6.Select a Cook Power. (Option: Skip to Step 8 if you want to cook at HIGH power.)
7.Touch the Number Pad for the Cook Power you want.
NOTE: “ERR” will be displayed after START is touched,
if an incorrect temperature nas been selected (under
To select a Cook Power other than HIGH, touch COOK POWER. The COOK POWER Indicator Light will come on and the Display will show
shows the oven is preprogrammed to cook at full (HIGH] power.
The Display will show what you touched. This example shows you touched Number Pad 6 for 60% of full power.
The PROBE TEMP and COOK POWER [if you are using a Cook Power other than HIGH] Indicator Lights will stay on.
The Display will show “COOL” if the food is less than 90°F As the food cooks, the Display will show the internal temperature of the food for every 5°F increase.
For 2 of every IO seconds, the Dis- play will show the Cook Power you selected, if you are using a Cook Power other than high.
When the probe senses the tempera- ture you selected, the oven shuts off. “End” will show on the Display and 4 beeps will sound. (You can stop the beeping by opening the door or by touching CANCEL.) “End” will remain on the Display and a reminder tone will sound every 60 seconds (to remind you that food is left in the oven) until the door is opened or CANCEL is touched. The Display will then show the time of day.
90°F and over 200°F).
20