Additional Information
l Temperature may be changed after START is touched by touching TEMF!the new number and START.
l Auto Set TEMP can be programmed to follow the Cook cycle, if desired.
l “PROB”will show on the Display after START is touched if the probe is not plugged into the oven. This will only appear when Auto Set TEMP has been selected alone, or between the last Cook cycle and Auto Set TEMP selection.
l “ERR”will show on the Display after START is touched, if an incorrect temperature has been selected (under 90°F or over 200°F).
l See “Hintsfor Using the Temperature Probe” on page 21.
Defrosting
Use QUICK | DEFROST to thaw | frozen food before cooking. | For suggested | defrost times, see | ||||||
the guide | behind | the oven | door | or in your | MICRO | MENUS”’ | Cookbook. | Do not | use defrosting | |
times developed | for other | types | of defrost | systems, | as | food | may be partially | cooked. | ||
DO THIS... |
|
| THIS HAPPENS... |
|
|
| ||||
1.Put frozen food in the oven and close the door.
2.Touch QUICK DEFROST.
4.Touch START.
The QUICK DEFROST Indicator Light will come on and the Display will show four 0’s.
The Display will show the number you touched in the order you touched them. This example shows 2 minutes, 30 seconds.
The QUICK DEFROST Indicator Light will stay on to show that the oven is in the Quick Defrost Cycle.
The Display counts down the time to show how much defrosting time is left.
When the defrost time ends, “End” will show on the Display and 4 beeps will sound. (You can stop the beeping by opening the door or by touching CAN- CEL.) “End” will remain on the Display and a reminder tone will sound every 60 seconds (to remind you that food is lefi in the oven) until the door is opened or CANCEL is touched. The Dis- play will then show the time of day.
15