The oven light
Electrical Shock Hazard4. Remove bulb holder mounting screw.
Disconnect power before removing vent cover.
Replace all panels before operating.
Failure to do so can result in death or electrical shock.
1. Turn off power at the main power supply.
2.Remove the vent cover mounting screws.
3.Tip the cover forward, then lift out to remove.
5.Lift up the bulb holder.
6.We recommend replacing the bulb with a
7.Replace the bulb holder and mounting screw.
8.Slide the top of the vent cover into place. Push the bottom until it snaps into place. Replace the mounting screws. Turn the power back on at the main power supply.
48