Whirlpool MH6700XW, MH6701XW manual Changing the Pre-Programmed Setting

Page 14

The Display will show what you touched. This example shows you touched Number Pad 5 for 50% of full power.

5.Touch a Number Pad for the Cook Power you want.

The AUTO SETand PROBE TEMP Indica- tor Lights will stay on. The Display will show “COOL” if the food is less than 90°F.As the food cooks, the Display

6. Touch START.will show the internal temperature of the food for every 5°F increase.

When the probe senses the tempera- ture you selected, the oven shuts off. “End” will show on the Display and 4 beeps will sound. (You can stop the beeping by opening the door or by touching CANCEL.) “End” will remain on the Display and a reminder tone will sound every 60 seconds (to remind you that food is left in the oven) until the door is opened or CANCEL is touched. The Display will then show the time of day.

NOTE: You can set Auto Set TEMP to follow COOK.

Auto Set TEMP can be programmed with the Temperature Probe out, but the oven will pause between the last Cook cycle and “PROB”will show on the Display to remind you to plug in the Temperature Probe.

Changing the Pre-Programmed Setting

You can change the pre-programmed temperature and Cook Power in Auto Set TEMP to the temperature and power you most often use. To change the Auto Set TEMP setting, follow these steps:

1.Touch TEMP twice

2.Touch the Number Pads for the new desired temperature between 90°F and 200 ‘F If HIGH Cook Power is desired, skip to Step 6.

3.Touch COOK POWER

4.Touch the Number Pad for the desired Cook Power.

5.Touch START.The oven will cook to the new temperature at the Cook Power you selected. After the cooking is complete, the oven will remember that temperature and Cook Power for future use. NOTE: If the electric power goes off, the oven will go back

to the pre-programmed 465°F at HIGH Cook Power setting.

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Models MH6700XW MH6701XW white MU37OOXW Efore you install your microwave oven IMPORTANT SAH33’ Instructions + lights Command PadsMicrowave oven controls Number Pads Fan and light Pads Audible SignalsSetting the Clock Using the Minute Timer Do this This HappensCancelling the Minute Timer Cooking at High Cook PowerChanging the Minute Timer Cooking in Your Microwave OvenChanging the Cooking Time Cooking at Lower Cook PowersCount dQWll Taunt Auto Set Time Using Auto SETChanging the Cook Power CDUd Changing the Pre-programmed Setting Auto Set TempChanging the Pre-Programmed Setting ~II DefrostingAdditional Information Changing or Adding Defrost Time Standing Time and Cooking Automatically After DefrostingAbout the Quick Defrost Cycle Cooking in More Than One Cycle at One or More Cook Powers Munt Cooking with the Temperature Probe Il ! aCancel Changing Hints for Using the Temperature Probe doRemoving and cleaning the Temperature Probe DON’TDo THIS... ,,.. ,1-.m Using PauseUsing Pause with Quick Defrost Z..,..WOPIdITo Automatically Follow Another Cycle Using Keep WarmAdding Pause Using Auto Start Do this This Happens0Wt-l Smoke Deflector Accessory Kit Other Operating HintsBi-Level Cooking Rack Cleaning the Microwave OvenCleaning the Rack Inserting the RackCaring for the Filters Oven light Replacing the Cooktop and Oven LightsCooktop light 3perrting safety precautions Page General information Before calling for assistanceIf you need assistance% If you need service%If you have a problem? Page Page Warranty
Top Page Image Contents