When the cooking time ends, “End” will show on the Display and 4 beeps will sound. (You can stop the beeping by opening the door or by touching CANCEL.] “End” will remain on the Display and a reminder tone will sound every 60 seconds (to remind you that food is left in the oven] until the door is opened or CANCEL is touched. The Display will then show the time of day.
Changing the Cook Power
The Cook Power can be changed any time before touching STARTor during the cycle.
Touch COOK POWER.
f Touch a number for the new Cook Power.
e Touch START.The cycle will cook at the new Cook Power for the original time. OR...
Touch COCK POWER twice if you want to change a lower Cook Power to HIGH Touch START.
Using AUTO SET
Auto Set TIME and TEMP are preset cooking cycles which store commonly used cooking times and probe temperature settings.
Auto Set TIME
Auto Set TIME provides ten preset times. One to nine minutes of cooking time at HIGH
Cook Power can be set by touching TIME and the corresponding Number Pad
The Auto Set Chart included with your microwave oven and the Auto Set Guide on the inner door panel help you use TIME to cook various food items without having to look up the cooking time.
A preset time of 2 minutes, 30 seconds at HIGH Cook Power is available by touching just the TIME Pad. The time may be changed to any time from
DO THIS... |
| THIS HAPPENS... |
,. “j”.~ |
1.Put tood In the oven and
close the | door. |
|
|
. ., ....“.‘. | ” | ,.... _ |
2.Touch TIME.
(Optlon: Sklp to Step 6 If you want to use the pre- set cooklng tlme and Cook Power.)
continued on next page