Microwave oven controls
There are four parts in the control section:
- Command Pads - Number Pads
Instructions for each control are covered on the following pages. Read them carefully.
When you first plug in the oven, a tone sounds and the Display will show 88:88. If after you set the Clock (page 6), the Display again shows all 8’s; your electricity was off for a while.
Reset the Clock.
Digital Display/Clock and Indicator
,-+ lights
When you are not using the micro- wave oven, it is an accurate Digital Clock.
When you are using the microwave oven, it displays time settings, Indicator Lights and shows you what Number Pads you touched.
7 Command Pads
//
Touch Command
Pads to tell the micro- wave oven what to do and in what order. A few examples:
See page 6 for information on the tone you hear when touching any pad.
Each Command Pad (except STARTand CANCEL] lights an Indicator Light on the digital display.