Beepbeep

6. Touch COOK POWER. (Optlon: Skip to Step 8 if you want to use HIGH power.)

8. Touch START.

dOWll

The COOK POWER Indicator Light will come on and the Display will show “P-HI:’This shows the oven is prepro- grammed to cook at full (HIGH) power.

The Display will show what you touched. This example shows you touched Number Pad 6 for 60% of full power.

When you touch START,the QUICK DEFROST Indicator Light will stay on. All other Indicator Lights will go off. The Display counts down the time to show how much time is left in the Quick Defrost cycle.

When the defrost time ends, the micro-

wave oven automatically lets the food stand for the same amount of time used for defrosting. The QUICK DEFROST Indicator Light stays on and the Display counts down the standing time. During the countdown the oven will be dark, and the fan will be off.

When the standing time is over, you will hear 2 beeps and the Cook cycle will start.

The COOK Indicator Light will be on during the Cook cycle. The COOK POWER Indicator Light will also be on if you are using a Cook Power other than HIGH.

The Display counts down the time to show how much time is left in the second cycle.

When the Cook cycle ends, “End” will show on the Display and 4 beeps will sound. (You can stop the beeping by opening the door or by touching CAN- CEL.) “End” will remain on the Display and a reminder tone will sound every 60 seconds (to remind you that food is left in the oven] until the door is opened or CANCEL is touched. The Display will then show the time of day.