Installation instructions

BEFORE YOU BEGIN, READ THE FOLLOWING INSTRUCTIONS COMPLETELY AND CAREFULLY.

Installing your microwave oven

1. Empty the microwave oven and clean inside it with a soft, damp cloth. Check

for damage such as misaligned door, damage around the door or dents inside the oven or on the exterior. If there is any damage,

please do not operate the unit until it has been checked by an authorized Whirlpool service technician and any repairs made.

3.Do not block the vent opening at the front of the oven or the air Intake opening on the bottom of the oven. Blocking vent or air intake openings can cause poor cooking results.

Make sure the microwave oven legs are in place. Do not set the oven on anything that will block the air intake openings.

2.Put the oven on a cart, counter, table or shelf that is strong enough to hold the oven, the food and the utensils you put in it. (The control

side of the unit is the heavy side. Use care when handling.) The weight of the oven is ap- proximately 60 Ibs. (27 kg).

4.Do not install the oven next to a conven- tional surface unit or in any area where excessive heat and steam are generated. This could damage the outside of the cabinet.