Whirlpool MW8550XS manual Nnm, Changing the cooking time, Cooking at lower cook powers

CDUd dQWn

The Display counts down the time to show how much time is left in the first cycle.

When the cooking time ends, “End” will show on the Display and 4 beeps will sound. (You can stop the beeping by opening the door or by touching CAN- CEL.) “End” will remain on the Display and a reminder tone will sound every 60 seconds (to remind you that food is left in the oven] until the door is opened or CANCEL is touched. The Display will then show the time of day.

Changing the cooking time

Cooking time can be changed any time before touching STARTor during the cycle:

I. Touch COOK.

2.Touch numbers for the new time.

3.Touch START.

Cook cycle will continue cooking for the new time.

Cooking at lower cook powers

For best results, some recipes call for lower Cook Powers. The lowerthe Cook Power, the slower the cooking. Each Number Pad also stands for a different percentage of Cook Power. Many recipes in your MICRO MENUS@ Cookbook tell you, by number, which Cook Power to use. Recipes in other books and magazines may tell you by name (HI, MED, LO, etc.] or

percentage (IO%, 50%, 80%, etc.).

The following chart gives the percentage of Cook Power each Number Pad stands for, and Cook Power name usually used.

automatic		100%	of full	power	HIGH	4	=	40%	of full	power
9	=	90%	of full	power		3 =		30%	of full	power	MED-LOW
8	=	80%	of full	power		2	=	20%	of full	power
7	=	70%	of full power		MED-HIGH	1 =		10% of full		power	LOW
6	=	60%	of full	power		0	=	timer	(fan	and light will be off]
5	=	50%	of full	power	MED
DO THIS...					THIS HAPPENS...

I.Put food in the oven and close the door.

nnm	.	._		The Display will show	the numbers you
uuw				touched In the order you touched
				them. This example	shows 7 minutes,
3. Touch Number Pads for the			I	30 seconds.
cooking tlme	you want.

a