Using your microwave oven
Microwave oven controls
There are three parts in the control section:
Instructions for each control are covered on the following pages. Read them carefully.
When you first plug in the oven, a tone sounds and the Display will be blank. If after you set the Clock (page 6), the Display becomes blank again, it means your electricity was off for a while. Reset the Clock.
Digital display/clock and indicator iighfs
When you are not using the microwave oven, this is an accurate digital clock. When you are using the microwave oven, it displays time set- tings, temperature set- tings and Indicator Lights.
Command pads
Touch Command Pads to tell the microwave oven what to do and in what order. A few examples:
- STARTtells the oven to start.
See page 6 for informa- tion on the tone you hear when touching any pad.
Each Command Pad, (except START,CANCEL and CLOCK SET] lights an Indicator Light on the digital display. The Indicator Light comes on when you touch the Command Pad.
While the oven is running, an Indicator Light [or lights) will be on to show what the oven is doing.
Number pads
-a food temperature.