Whirlpool MW8650XS manual COdI dOWll, Changing the pre-programmed setting

Page 12

5.Touch a Number pad for the Cook Power you want.

6. Touch START.

COdI dOWll

The Display will show what you touched. This example shows you touched Number Pad 5 for 50% of full power.

The AUTO SETIndicator Light will

stay on while the oven is cooking in

the preprogrammed cycle. If you selected a Cook Power other than high, the Cook Power Signal Light will also come on. This shows you the oven is cooking at a selected Cook Power.

The Display counts down the time to show how much cooking time is left.

For 2 of every 10 seconds, the Display will show the Cook Power you selected, if you are using a Cook Power other than high.

When Auto Set ends, “End” will show on the Display and 4 beeps will sound. (You can stop the beeping by opening the door or by touching CANCEL.) “End” will remain on the Display and a beep will sound every 30 seconds (to remind you that food is left in the oven) until the door is opened or CANCEL is touched. The Display will then show the time of day.

You can set COOK to follow

Auto Set TIME, if desired.

Touch

in instructions

for”Cooking

in

your microwave

oven:’ page

8; or “Cooking at lower

cook

powers:’ page

9.

 

Changing the pre-programmed setting

You can change the pre-programmed cooking time and Cook Power in AUTO SETTIME to the time and power you most often use. To change the AUTO SETTIME setting, follow these steps.

1.Place food in the oven and close the door.

2.Touch TIME twice.

3.Touch the Number Pads for the new desired cooking time. If high Cook Power is desired, skip to Step 6.

4.Touch COOK POWER.

5.Touch the Number Pad forthe desired Cook Power.

6.Touch START.The oven will cook at the new cooking time and Cook Power you selected. After the cooking is complete, the oven will remember that time and Cook Power for future use. NOTE: If the electric power ever goes off, the oven will go back to the

pre-programmed 2 minutes, 30 seconds at high Cook Power setting.

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Microwave Oven Contents Parts and featuresBefore you install your microwave oven Before you use your microwave ovenSAW These Instructions Using your microwave oven Digital displav/clock and indicator iighfsCommand pads Microwave oven controlsSetting the clock Programming toneUsing the minute timer Changing the minute timerCancelling the minute timer Cooking at high cook power Cooking in your microwave ovenCooking at lower cook powers Changing the cooking timeChanging cook power DQWtlUsing Auto SE? Auto Set TimeChanging the pre-programmed setting COdI dOWllAuto Set Temp Additional information Defrosting Standing timeAbout the Wjick Defrost Cycle Cooking automatically after defrosting Changing or adding defrost timeDClWll COJd dQWllCooking with theTEMPERATURE Probe Hints for using the temperature probe Changing the temperature setting Cleaning the probeRemperature probe cooking tips Using Keep Warm To automatically follow another cycleOther operating hints Cleaning the rack Bi-level cooking rackInserting the rack Special cautionInstallation instructions Installing your microwave ovenInstructions Electrical requirementsCleaning the microwave oven Caring for your microwave ovenBuilding in your microwave oven Replacing the light bulbHow your microwave oven works Operating safety precautions Never Cook or Reheat a Whole EGGNeral information Before calling for assistance If you need assistance?If you need service If you have a problemWarranty
Top Page Image Contents