Auto Set Temp

Auto Set TEMP provides ten preset probe temperature settings. One hundred ten (110)to one hundred ninety (190) degrees at 70% cook power can be set by touching TEMP and

the corresponding number pad l-9. This provides a short-cut method for setting com- monly used probe temperatures. The AUTO SETchart included with your microwave oven and the AUTO SETguide on the inner door panel help you use TEMP to cook various food items without having to look up the temperature.

A preset temperature of 165°F at HIGH cook power is available after inserting the probe by touching just the TEMP pad. This temperature may be changed to any temperature from 90°F to 200°F allowing you to store your favorite cooking temperature and cook power. See page 14 for instructions.

DO THIS...

THIS HAPPENS...

I. Put food in the oven and close the door.

2.Touch TEMP.

(Option: Skip to step 6 if you want to use the pre-

set temperature and Cook Power.)

3.Touch a Number Pad for

the new temperature you want from 110°F to 190°F.

4.Touch COOK POWER. (Option: Skip to Step 6 if you want to cook at 70% power.)

5.Touch a Number Pad for the Cook Power you want.

The AUTO SETIndicator Lights

will come on and the Display will show 165°F (or the temperature

you have programmed as your favorite cycle).

The Display will show what you touched in degrees Fahrenheit. This example shows 140°F.NOTE: Cook Power of 70% is preset on TEMP settings 1-9.

The COOK POWER Indicator Light will come on and the Display

will show “P-70”

The Display will show what you touched. This example shows you touched Number Pad 5 for 50% of full power.

continued on next page