Whirlpool MW8650XS manual Additional information

Page 14

6. Touch START.

The AUTO SETand

PROBE TEMP

 

 

Indicator Lights will stay on.

 

 

The Display will show “COOL” to

 

show the food is less than 90°F

 

 

As the food cooks the Display will

 

show the

internal temperature

of

 

the food

for every

5°F increase.

 

For 2 of every 10 seconds, the Display will show the Cook Power you selected, if you are using a Cook Power other than high.

When the probe senses the tem- perature you selected, the oven shuts off. “End” will show on the Display and 4 beeps will sound. [You can stop the beeping by opening the door or by touching CANCEL.) “End” will remain on the Display and a beep will sound every 30 seconds (to remind you that food is left in the oven] until door

is opened or CANCEL is touched. The Display will then show the time of day.

NOTE: You can set Auto Set TEMP to follow COOK.

Auto Set TEMP can be programmed with the temperature probe out, but the oven will pause between the last Cook cycle and TEMP’PROB” will show on the Display to remind you to plug in the probe.

Changing the pre-programmed setting

You can change the pre-programmed temperature and Cook Power in Auto Set TEMP to the temperature and power you most often use. To change the Auto Set TEMP setting, follow these steps:

1.Insert at least% of the temperature probe into the food.

2.Place food in the oven and close the door.

3.Touch TEMP twice.

4.Touch the Number Pads for the new desired temperature between 90 ‘Fand 200 F If high Cook Power is desired, skip to Step 6.

5.Touch COOK POWER.

6.Touch the Number Pad for the desired Cook Power.

7.Touch START.The oven will cook to the new temperature at the Cook Power you selected. After the cooking is complete, the oven will remember that temperature and Cook Power for future use. NOTE: If the electric power goes off, the oven will go

back to the pre-programmed 165°F at high Cook Power setting.

Additional information:

l Temperature may be changed after STARTis touched by touching TEMP the new number and START.

. Auto Set TEMP will follow the COOK cycle if programmed.

l “PROB”will show on the Display after STARTis touched if the probe ISnot plugged

into the oven. This will only appear when Auto Set TEMP has been selected atone, or between the last COOK cycle and Auto Set TEMP selection,

l “ERR”will show on the Display after STARTis touched, if an incorrect temperature has been selected [under 90 F or over 2OO’F).

l See “Hintsfor using the temperature probe” on pages 18 and 19.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Microwave Oven Contents Parts and featuresBefore you install your microwave oven Before you use your microwave ovenSAW These Instructions Command pads Using your microwave ovenDigital displav/clock and indicator iighfs Microwave oven controlsSetting the clock Programming toneCancelling the minute timer Using the minute timerChanging the minute timer Cooking at high cook power Cooking in your microwave ovenCooking at lower cook powers Changing the cooking timeChanging cook power DQWtlUsing Auto SE? Auto Set TimeChanging the pre-programmed setting COdI dOWllAuto Set Temp Additional information About the Wjick Defrost Cycle DefrostingStanding time Cooking automatically after defrosting Changing or adding defrost timeDClWll COJd dQWllCooking with theTEMPERATURE Probe Hints for using the temperature probe Remperature probe cooking tips Changing the temperature settingCleaning the probe Using Keep Warm To automatically follow another cycleOther operating hints Inserting the rack Cleaning the rackBi-level cooking rack Special cautionInstallation instructions Installing your microwave ovenInstructions Electrical requirementsBuilding in your microwave oven Cleaning the microwave ovenCaring for your microwave oven Replacing the light bulbHow your microwave oven works Operating safety precautions Never Cook or Reheat a Whole EGGNeral information Before calling for assistance If you need assistance?If you need service If you have a problemWarranty
Top Page Image Contents