Whirlpool MW8650XS manual Caring for your microwave oven, Building in your microwave oven

Page 26

Building in your microwave oven

Your microwave oven is not limited to carts, counters or tables. Custom installations are made easy with kits available from your dealer.

1.Build the microwave oven into a cabinet or wall by itself or over built-in single ovens in the Whirlpool RDE, REE,RGE, RB and SB model series.

2.Attach the microwave oven to a wall by itself or with cabinets over it.

3.Put the microwave oven on the MICRO SHELF@ Hood over a cooktop. The hood is available

ducted or as a recirculating hood, and includes cooktop lights.

Ask your dealer for details on...

l 832987 - 30-inch Built-in Kit l 832989 - 24-inch Built-in Kit l 832991 -27-inch Built-in Kit l 832993 -Wall Mounting Kit

. RH3330XR - MICRO SHELF‘; Hood

Use only approved installation kits.

Obtain these kits from your authorized Whirlpool dealer.

Caring for your microwave oven

Cleaning the microwave oven

Wipe

often

with

warm

sudsy

For stubborn soil, boil a cup

water

and

a soft

cloth

or

of water

in the

oven

for 2 or 3

sponge.

 

 

 

minutes.

Steam

will

soften

 

 

 

 

 

the soil.

 

 

 

CAUTION:

Abmslve cleansers, steel wool pads, gritty wash cloths, etc., can damage the control panel, and the lnterlor and exterior oven surfaces. Use a sott cloth or a sponge wlth a mlld detergent or spmy glass cleaner.

Be sure to cle% the areas where the door and oven frame touch when closed.

When cleaning surfaces of door and oven that come to- gether on closing the door, use only mild, non-abrasive soaps or detergents applied with a sponge or soft cloth. Rinse well.

Replacing the light bulb

The microwave oven light should come on whenever the door is opened or the oven is operating.

To replace:

1.Unplug, or turn off at fuse box or circuit breaker.

2.Open the oven door.

3.Remove the 3 screws from the front of the cover.

4.Pull down the front portion of the cover.

(It is creased across its width to form a hinge.]

5.Remove and replace the 25-watt candelabra- base bulb (Part No. 313969). Obtain bulb from your authorized Whirlpool dealer.

6.Close the cover and replace the screws

7.Plug in, or turn on the main power supply.

26

Image 26
Contents Microwave Oven Contents Parts and featuresBefore you install your microwave oven Before you use your microwave ovenSAW These Instructions Command pads Using your microwave ovenDigital displav/clock and indicator iighfs Microwave oven controlsSetting the clock Programming toneCancelling the minute timer Using the minute timerChanging the minute timer Cooking at high cook power Cooking in your microwave ovenCooking at lower cook powers Changing the cooking timeChanging cook power DQWtlUsing Auto SE? Auto Set TimeChanging the pre-programmed setting COdI dOWllAuto Set Temp Additional information About the Wjick Defrost Cycle DefrostingStanding time Cooking automatically after defrosting Changing or adding defrost timeDClWll COJd dQWllCooking with theTEMPERATURE Probe Hints for using the temperature probe Remperature probe cooking tips Changing the temperature settingCleaning the probe Using Keep Warm To automatically follow another cycleOther operating hints Inserting the rack Cleaning the rackBi-level cooking rack Special cautionInstallation instructions Installing your microwave ovenInstructions Electrical requirementsBuilding in your microwave oven Cleaning the microwave ovenCaring for your microwave oven Replacing the light bulbHow your microwave oven works Operating safety precautions Never Cook or Reheat a Whole EGGNeral information Before calling for assistance If you need assistance?If you need service If you have a problemWarranty