Whirlpool W10726840A Adjust the Doors, Freezer Door, Door Closing, Door Aligning, Parts Included

Page 11

Reversibility Kit Instructions

If your model came with a Reversibility kit, please use the Brand Badge Placement template and the following instructions to install the Brand Badge on the opposite side of the freezer door.

Parts Included:

■Brand badge removal tool

■Brand badge template (on last page)

■Door handle hole plug

Tools Needed:

■Scissors

■Masking tape

Freezer Door

1.Using the removal tool (provided), remove the brand badge from the freezer door by lifting up the right-hand side and peeling the badge away from the door from right to left.

NOTE: To avoid scratching the door, do not use a sharp or metallic object to pry the brand badge from the door.

2.Rub a small amount of liquid dish soap over any adhesive residue with your fingers. Rinse the door with warm water and dry with a soft cloth.

3.Cut the template along the dotted lines that match the shape of the brand badge.

4.Align the edges of the template with the side and top of the freezer door and tape the template to the door.

NOTE: When the template is correctly aligned, the hole in the door, where the handle was, will be within the cutout of the template, as shown.

5.Using the cutout as a guide, press the brand badge onto the freezer door making sure that the hole is completely covered.

6.Slowly remove the template.

Adjust the Doors

IMPORTANT: To comply with American Disabilities Act (ADA) guidelines, fully retract the rollers into the cabinet to lower the refrigerator.

Door Closing

Your refrigerator has two front adjustable rollers – one on the right and one on the left. If your refrigerator seems unsteady or you want the doors to close easier, adjust the refrigerator's tilt using the following instructions:

1.Remove the base grille. See the Base Grille graphic in “Refrigerator Doors.” The two leveling screws are part of the front roller assemblies, which are at the base of the refrigerator on either side.

2.Use a socket driver to adjust the leveling screws. Turn the leveling screw to the right to raise that side of the refrigerator or turn the leveling screw to the left to lower that side. It may take several turns of the leveling screws to adjust the tilt of the refrigerator.

NOTE: Having someone push against the top of the refrigerator takes some weight off the leveling screws and rollers which makes it easier to adjust.

3.Open both doors again to make sure they close as easily as you like and that they stay closed. If not, tilt the refrigerator slightly more to the rear by turning both leveling screws to the right. It may take several more turns.

NOTE: To keep the refrigerator level, you should turn both leveling screws the same amount.

4.Replace the base grille.

Door Aligning

If the space between your doors looks uneven, you can adjust it using the following instructions:

1.Depending on your model, remove the top hinge cover. Loosen the top hinge screws using a ⁵⁄₁₆" socket or wrench.

2.Have someone hold the door in place or put a spacer between the doors while you tighten the top hinge screws.

3.Replace the top hinge cover, if removed in Step 1.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Réfrigérateur superposé Top Mount RefrigeratorYour safety and the safety of others are very important Refrigerator SafetyBefore You Throw Away Your Old Refrigerator or Freezer Installation InstructionsClean Before Using Unpack the RefrigeratorRecommended Grounding Method Location RequirementsElectrical Requirements Water Supply RequirementsConnect the Water Supply Style 1 Standard Door Models Refrigerator DoorsRemove Doors and Hinges Reverse Doors optionalRefrigerator Door Style 2 Contour Door ModelsContour Door Models Only Replace Doors and HingesFinal Steps Style 1 Standard Door Removal Replacement Door Swing Reversal optionalStyle 2 Contour Door Swing Reversal optionalDoor Aligning Adjust the DoorsFreezer Door Door ClosingCrisper Refrigerator FeaturesRefrigerator Shelves Deli DrawerFrozen Food Storage Guide Freezer FeaturesWire Freezer Shelf Glass Freezer ShelfUtility Compartment Door FeaturesDoor Rails Door BinsPage Votre sécurité et celle des autres est très importante Sécurité DU RéfrigérateurNettoyage avant l’utilisation Instructions D’INSTALLATIONDéballage du réfrigérateur Enlèvement des matériaux d’emballageSpécifications de l’alimentation en eau Exigences demplacementMéthode recommandée de mise à la terre Spécifications électriquesRaccordement à une canalisation d’eau Raccordement de la canalisation deauPression de leau Alimentation en eau par osmose inverseStyle 1 Modèles avec porte standard Achever l’installation Démontage Portes et charnièresPortes du réfrigérateur Inversion des portes facultatifPorte du réfrigérateur Style 2 Modèles avec porte contourPorte du congélateur Enlever le couvre-vis. Voir lillustrationModèles avec porte contour Réinstallation des portes et charnièresÉtapes finales De la porte Inversion du sens douverture de la porte facultatifDémontage et réinstallation De la porte Fermeture des portes Instructions pour lensemble d’inversion Du sens d’ouvertureAjustement des portes Porte du congélateurTiroir pour spécialités alimentaires Caractéristiques DU RéfrigérateurTablettes du réfrigérateur Bac à légumesGuide de stockage des aliments surgelés Caractéristiques DU CongélateurTablette métallique du congélateur Tablette en verre du congélateurCompartiment utilitaire Caractéristiques DE LA PorteTringles de porte Balconnets de porteW10726840A Page Standard Door Porte Standard Porte Contour Contour Door
Top Page Image Contents