Defy Appliances DCH285, DCH261, DCH260, DCH284 owner manual Installation sequence

Page 4

Installation..

Installation sequence;

1.Extractor unit / chimney brackets.

2.Top chimney duct

3.Bottom chimney duct

Carefully remove the extractor hood and the components from the packaging.

Remove the grease filters.

CEILING MOUNTING TEMPLATE

CEILING MOUNTING

BRACKET POSITION

In a similar fashion stick the hood mount-

 

ing template on the wall ensuring that the

 

centre-lines line up with those drawn on

the wall.

Note that the holes marked on the tem-

 

plate cater for both 600mm and 900mm

 

wide models. Please ensure that you only

 

use those markings relating to the model

 

you have purchased.

 

Holes for Triangular 600 are marked

 

with a (1).

 

Holes for Triangular 900 are marked

 

with a (2).

CUT TEMPLATE

HOOD TEMPLATE

TOP OF CEILING

 

Holes not marked are common to all

models.

For mounting the chimney brackets, drill

 

6 holes, 5mm in diameter and 45mm deep

 

into the wall as indicated on the mounting

template.

For mounting the extractor hood, drill 4

LINE FROM CENTRE OF STOVE TO CEILING

750

HORIZONTAL LINE

Draw a fine vertical line on the wall from the rear-centre of the hob to the ceiling.

Draw another line, horizontal this time, where the bottom edge of the hood should be. (A minimum distance be- tween the hob and the hood of 750mm is recommended.)

Take the template card and separate the ceiling mounting template from the hood mounting template by cutting along the indicated line.

Using masking tape, stick the ceiling mounting template to the wall directly below the ceiling and centered on the vertical line.

 

holes, 8mm in diameter and 60mm deep

as indicated on the mounting template.

Once all the holes have been drilled the

templates must be removed.

Push the 5mm Dia. wall plugs through the

 

holes in the chimney mounting brackets.

 

Insert the plugs into the drilled holes to-

 

gether with the chimney mounting bracket

 

and fasten securely.

• Push the 8mm Dia. wall plugs into the

 

8mm Dia. holes ensuring that they are

flush with the wall.

Partially screw two 6mm Dia. screws into

 

the two top wall plugs leaving them to

protrude about 10mm.

Lift and hook the extractor hood over and

 

onto the two protruding screws through

 

the key-hole slots provided at the top of

 

the extractor hood frame.

• Insert the other two 6mm Dia. screws

 

through the holes inside the extractor

 

hood housing and into the 8mm Dia wall

plugs.

Align the extractor hood with the centre

 

and horizontal lines before tightening all

 

four 6mm screws.

Page 4

Image 4
Contents Premium Chimney Hood Safety advice DescriptionBefore use Electrical connectionPreparing for installation Tools required for installationRecirculating filtered air Venting air to the outsideInstallation Installation sequenceInsert 6 Self Tapping Screws Grease filters Optional Carbon pad filtersOperation Replacing the light bulbsMaintenance and cleaning Cleaning materials Do useCleaning procedure Do not useService Problem checkOwner’s responsibility Warranty

DCH284, DCH260, DCH261, DCH285 specifications

Defy Appliances has long been a trusted name in home appliances, offering a wide range of innovative solutions designed to enhance everyday living. Among its impressive lineup, the Defy DCH261, DCH285, DCH284, and DCH260 models stand out for their modern features and advanced technologies, appealing to consumers who value efficiency and reliability.

The Defy DCH261 is designed for seamless functionality, featuring a compact build that makes it an excellent choice for smaller spaces. This model incorporates advanced heating elements that ensure quick and uniform cooking results, while its energy-efficient design aids in reducing electricity consumption. The easy-to-use interface, with clearly labeled dials and buttons, allows users to navigate settings effortlessly.

Moving up the range, the DCH285 offers additional capacity and flexibility. This model is equipped with innovative convection technology that circulates hot air, ensuring even cooking and browning. The DCH285 includes multiple cooking modes, making it versatile enough to handle a range of culinary tasks, from baking to roasting. Its sleek design not only adds a modern touch to the kitchen but also makes cleaning a breeze.

The DCH284 model takes convenience to the next level with its user-friendly digital display. This model features programmable settings, allowing users to set specific cooking times and temperatures for different dishes. The DCH284 also boasts a rapid heating feature that significantly cuts down cooking time, ideal for busy households. Additionally, its spacious interior can accommodate large dishes, perfect for family meals or gatherings.

Lastly, the DCH260 presents a blend of style and functionality. This model comes with a durable stainless-steel exterior, providing both an aesthetic appeal and easy maintenance. The DCH260 includes a variety of safety features, such as automatic shut-off and overheating protection, ensuring peace of mind during use. Its energy-saving settings are designed to minimize electricity consumption without compromising performance.

In summary, Defy Appliances' DCH261, DCH285, DCH284, and DCH260 models showcase an impressive range of features and technologies that cater to diverse cooking needs. From compact designs and user-friendly interfaces to innovative cooking technologies, these appliances represent the perfect fusion of efficiency, style, and safety, making them valuable additions to any modern kitchen.