Multi-Tech Systems ISI4608-PCI manual Introduction, Safety Warnings Telecom

ISI4608-PCI User Guide

Introduction

This chapter describes installation of the Multi-Tech ISI4608-PCI as an expansion card in your PCI bus computer.

Safety Warnings Telecom

1.Never install telephone wiring during a lightning storm.

2.Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.

3.This product is to be used with UL and CUL listed computers.

4.Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface.

5.Use caution when installing or modifying telephone lines.

6.Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electrical shock from lightning.

7.Do not use the telephone to report a gas leak in the vicinity of that leak.

8.To reduce the risk of fire, use only No 26 AWG or larger Telecommunication line Cord.

Hardware Installation Procedures

To install the ISI4608-PCI card into your PC-PCI bus computer:

1.Before handling the ISI4608-PCI, discharge any static in your body by touching a piece of grounded metal such as the computer chassis.

2.Carefully remove the ISI4608-PCI from its antistatic bag, handling it only by the mounting bracket and edges. Do not touch the gold- plated connectors along the bottom edge. (You may want to save packaging for possible future use.)

3.Visually inspect the ISI4608-PCI. If you have any concerns about its condition, call Technical Support at (800) 972-2439.

12