Multi-Tech Systems ISI4608-PCI manual Remove ISI460x-PCI Driver Windows

ISI4608-PCI User Guide

Remove ISI460x-PCI Driver (Windows 2000)

1.Go to Start Settings Control Panel.

2.ClickonAdd/RemoveHardware.ClickNext.

3.Click on “Uninstall/Unplug a device” and click Next.

4.In the subsequent screen, click on “Uninstall a device” and click Next.

5.At the Add/Remove Hardware Wizard screen, highlight the ISI driver file for the specific server card that you intend to remove. ClickNext.

6.When you are asked to confirm removal, click on the Yes radio button and click Next.

7.Click Finish. You can remove the driver for only one ISI460x-PCI card at a time.

ISI460x-PCI Software Installation Procedure for Windows NT 3.51/4.0

1.Turn off the PC.

2.The ISI460x-PCI card must be installed in a PCI expansion slot in the computer. If not, follow the computer manufacturer's instructions concerning installation of expansion cards. Observe standard precautions regarding electro-static discharge (ESD) when handling the ISI460x-PCI board (the board should be kept in its shipping bag until used). During installation, handle the ISI460x-PCI circuit card by its edges and keep one hand in contact with the computer chassis.

3.Turn on the PC and start Windows NT.

4.Insert the driver CD-ROM into the CD-ROM drive. (If drivers were obtained from MultiTech web site and stored on diskette, place diskette into floppy drive now.)

5.Click Start Settings Control Panel Network Adapters. Then click Add.

26