Multi-Tech Systems ISI4608-PCI manual Removing ISI4608x-PCI Card and Driver in Windows NT 3.51/4.0

Chapter 3—Software/Driver Installation

12.The file is copied and "Multi-Tech ISI4608-PCI Adapter" appears in the Network Adapters box. Click Close.

13.When prompted about restarting your computer, click Yes. The ISI460x-PCI card software is now installed in Windows NT.

Removing ISI4608x-PCI Card and Driver in Windows NT 3.51/4.0

1.Go to Start Settings Control Panel Network. Click on the Adapters tab.

2.Select "MultiTech 4, 8, 16-port ISI card," and then click Remove.

To complete the un-install procedure, restart your computer.

29