Multi-Tech Systems ISI4608-PCI manual Servcard\Utility\Mgmt\Setup.Exe

ISI4608-PCI User Guide

Notice that the auto-detection facility of Windows 2000 will repeat the “ISI Port” installation sequence 7 more times for the ISI4608- PCI, or 3 more times for the ISI4604-PCI. That is, the Found New Hardware -- MultiTech ISI Port screen will appear many times after the ISI driver has been located. On this screen, the messages “Found New Hardware” and “Installing ...” will appear alternately.

Please understand that the repetition of these screen sequences is normal and is not an error. It does not indicate any problem with your PC, or with the MultiTech ISI card, or its driver software.

16. Driver installation for the ISI460x-PCI card is complete.

ISI460x-PCI for Windows 2000: Installing ISI Manage- ment Software (server OSs only)

If you are using a Windows 2000 Server operating system ("Server" or "Advanced Server"), you must decide whether you want to use the MultiTech ISI Management Software in conjunction with your ISI460x- PCI card. The ISI Management Software is shipped with the ISI card.

1.Turn on your computer and start Windows 2000.

2.Insert the CD-ROM containing the ISI Management Software into your CD-ROM drive. (If ISI Management Software has been downloaded from the MultiTech web site, it will typically be on a diskette. In that case, insert diskette into floppy drive).

3.Go to Start Run. In the Run window, enter the file path of the ISI Management software. Typically, this would be

E:\SERVCARD\UTILITY\MGMT\SETUP.EXE.

ClickOK.

24