Installation

9.Assemble the ventilation duct(H), as shown in the diagrams below dependant on whether you are extracting air to the outside (Fig 10) or re-circulating (Fig 11), in which case you will need to use the supplied T-piece (M). Ensure that the duct adapter (F) is securely connected to the duct pipe or T-piece in order to minimise noise.

10.Fit the vent adapter(F) to the body of the motor as shown in Fig 11 using 2 screws (E)

11.Mount the upper chimney section onto the frame section and secure in position using the 2 screws (A) as in Fig 12.

Fig. 10

Fig. 11

Fig. 12