Cannon C60GCB Unpacking the Cooker, Levelling, Conversion for USE on Butane G30 or Propane G31

Page 31

INSTALLATION INSTRUCTIONS

UNPACKING THE COOKER

Unpack the components from inside the grill and oven. Check that the following parts are present:

Grill pan and grid

Top oven/grill shelf heta shield

Baking dish

Pan supports

Main oven shelves (2)

Enamelled burner caps (4)

Top oven/grill shelf (1)

Literature

Aluminium burner bodies (4)

 

LEVELLING

Four skid feet are fitted which can be adjusted up or down to level the cooker.

CONVERSION FOR USE ON BUTANE (G30) OR PROPANE (G31)

Each burner requires the injector to be replaced and bypass screws adjusted or replaced as follows:

1.Remove the loose hotplate burner parts.

2.Using a 7mm socket, replace the hotplate injectors as appropriate (see table on previous page).

3.Re-position the loose burner parts.

4.Remove the enamelled baffle at the front of the grill (2 screws).

5.Remove the screw on the right hand side of the burner and gently slide the burner off the injector.

6.Using a 7mm socket, replace the grill injector as appropriate (see table on previous page).

7.Re-assemble the burner and baffle.

8.Inside the top oven, remove the central screw securing the burner retainer. Slide the retainer to the right slightly and lift away.

9.Lift the burner assembly and place on the floor of the oven to the right of the burner opening.

10.Using a 7mm socket, replace the oven injector as appropriate (see table on previous page). 11.Re-assemble the oven burner and retainer.

12.Replace the main oven injector following the same procedure as for the top oven.

13.From behind the cooker, remove the screws securing the rear panel and swing the left hand side outwards (viewed from the rear) to gain access to the main oven flame supervision device.

14.Replace the flame supervision device bypass screw. 15.Re-assemble the rear panel.

16.Carefully pull off the control knobs and timer buttons.

17.Remove the 2 screws securing the underside of the control panel. Slide the control panel to the left slightly to remove.

18.Remove the 6 screws securing the timer mounting panel. Without completely removing it, manoeuvre the timer mounting panel to gain access to the thermostat bypass screws.

19.Using a narrow flat bladed screwdriver rotate the bypass screws fully clockwise. The main oven thermostat bypass screw is located on the body of the thermostat below the spindle, the top oven thermostat bypass screw is located on the body of the thermostat to the right of the spindle and the hotplate tap bypass screws are located down the centre of the spindle.

20.Re-assemble the control panel parts.

21.Secure the self-adhesive LPG conversion label over the gas details on the data badge.

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Chesterfield C60GCW C60GCK C60GCS C60GCB Contents Introduction Always For Your SafetyNever Automatic Cooking Oven Timer OperationGuidance on Automatic Cooking Clockface Timer Function ButtonsSymbols Auto Cooking ProgrammeSetting the Minute Minder Setting the Time of DAYAuto Cooking Programmes A1 6 Other Notes on Timer Operation To USE the Hotplate HotplateHOW to Deal with a FAT Fire Safety Requirements for Deep FAT FryingStandard Grill PAN and Handle GrillTo USE the Grill Remove Heat Shield From Shelf When Grilling for MaximumRelighting the Burner To USE the Main Oven Main OvenCook Chill Dishes Cold Start CookingRoasting of Large Poultry Storage and RE-HEATING of FoodFish Main Oven Cooking ChartYeast Mixtures Using the Slow Cook Setting for Slow Cooking ‘SLOW COOK’ SettingRelighting the Burner Guidance on Using the TOP OvenTOP Oven To USE the TOP OvenTOP Oven Cooking Chart Food Gas Shelf Approx. Cooking Time and Comments Oven Doors Care and CleaningOven Heat Clean Linings Replacement of Oven Light BulbCooker Finish Cleaning Method Something Wrong With Your Cooker Problem CheckDisposal of your product Location Installation InstructionsGAS Safety Installation & USE Regulations Model Numbers C60GCBurner Technical DataCooker Hoods Space for FixingLevelling Unpacking the CookerConversion for USE on Butane G30 or Propane G31 Stability Chain Connecting to GAS SupplyIf the Fitted Plug is Removed Electrical ConnectionIf a Moulded Plug is Fitted Installation and Operational Checks Guarantee After Sales Service

C60GCB, C60GCK, C60GCS, C60GCW specifications

The Cannon C60 series, which includes models C60GCS, C60GCK, C60GCB, and C60GCW, represents a remarkable advance in technology and design, offering users a robust solution tailored for various applications. These versatile machines cater to a range of needs, combining efficiency and precision in a compact format.

One of the main features across the C60 series is their powerful processing capabilities. Equipped with high-performance CPUs, these units can handle large volumes of data swiftly and efficiently, making them ideal for environments requiring rapid output without compromising on quality. The processing speed ensures that tasks are completed in a timely manner, maximizing productivity for businesses.

Another standout characteristic of the C60 series is its advanced imaging technology. Thanks to state-of-the-art printing methods, these machines produce sharp, clear images with vibrant colors. Whether you need high-quality documents for business presentations or colorful materials for marketing purposes, the C60 series consistently delivers outstanding results. The color accuracy and detail are particularly notable, positioning these printers as a preferred choice for graphic designers and marketing teams.

User-friendliness is also a key design feature. The intuitive touchscreen interface allows for easy navigation and operation, enabling even those with minimal technical knowledge to utilize the machines effectively. The series is designed with versatility in mind, supporting various media types and sizes, making them suitable for a broad array of printing tasks, from standard documents to specialized projects.

Durability and reliability are hallmarks of the Cannon C60 series. Constructed with high-quality materials, these machines are built to withstand the rigors of daily use. They are also designed for easy maintenance, which reduces downtime and extends the overall lifespan of the product. This feature is particularly beneficial for organizations looking to minimize operational costs.

In addition, energy efficiency is a key consideration in their design. With eco-friendly features, the C60 series aims to reduce resource consumption without sacrificing performance, aligning with the growing trend toward sustainable practices in business operations.

In summary, the Cannon C60GCS, C60GCK, C60GCB, and C60GCW models combine powerful processing, advanced imaging technology, user-friendly interfaces, and durability, making them exceptional choices for businesses seeking high-performance printing solutions. These models exemplify innovation and reliability, meeting the diverse needs of users across various industries.
Top Page Image Contents