Cannon 10512G, 10515G, 10510G, 10518G To Set the Minute Minder Step, Bleeper Sound

Page 16

00.20CLOCK & MINUTE MINDER

MINUTE MINDER OPERATION

To Set the Minute Minder

 

 

 

 

 

 

Step 1

Press the “+” button until the

 

 

 

 

 

 

 

 

 

 

 

 

 

required time is set. A “Bell”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

symbol will light up. During

 

 

 

 

 

 

 

 

 

 

 

 

 

 

setting the time adjusts in 10

❍ ❍ ❍

second intervals up to a

13.23

 

 

maximum of 99mins 50secs.

It can also be adjusted by pressing the “-” button.

At the end of the set time, a bleeping sound will be heard and the “Bell” will

disappear.

❍ ❍ ❍

The bleeper can be cancelled by pressing the “+” button.

The minute minder can be cancelled before the bleeper sounds by pressing the “+” and “-” buttons together until 0.00 appears in the display window.

BLEEPER SOUND

To adjust the pitch of the bleeper, press the “-” button while the bleeper is sounding. For example:-

(a)Press the “+” button and set 10 seconds.

(b)When the bleeper sounds, press and release the “-” button, until preferred pitch is set.

(c)Press and release the “+” button to cancel the bleeper.

NOTE: If the sound of the bleeper appears to be different, it is most likely that the pitch of the bleeper has been inadvertently adjusted.

16

Image 16
Contents Oakley Contents Introduction For Your Safety Please read the precautions below before using your cookerFor Your Safety Hotplate To USE the HotplateSafety Requirements for Deep FAT Frying HOW to Deal with a FAT FireGrill Grill PAN HandleTo USE the Grill Relighting the BurnerGrill Oven To USE the OvenCold Start Cooking Roasting of Large PoultryStorage and RE-HEATING of Food ‘COOK CHILL’ DishesOven Cooking Chart Meat and PoultryYeast Mixtures ‘SLOW COOK’ Setting Using the ‘SLOW COOK’ Setting for Slow CookingTo Set Time of Day Clock & Minute MinderTime of DAY is NOW SET To Set the Minute Minder Step Bleeper SoundOven Heat Clean Linings Care and CleaningReplacement of Oven Light Bulb Cooker Finish Cleaning Method Vitreous EnamelProblem Check Something Wrong With Your CookerInstallation Instructions GAS Safety Installation & USE RegulationsModel Numbers 10510G, 10512G, 10515G and 10518G LocationTechnical Data Dimensions GeneralSpace for Fixing Cooker HoodsConnecting to GAS Supply Unpacking the CookerLevelling Stability BracketElectrical Connection Connect to a 230-240V A.C. Supply onlyInstallation and Operational Checks Page Disposal of Your Product Key Contacts