Cannon 10510G, 10512G, 10515G, 10518G installation instructions Space for Fixing, Cooker Hoods

Page 22

INSTALLATION INSTRUCTIONS

SPACE FOR FIXING

The cooker can be close fitted below hotplate level. This requires a minimum distance of 503mm between cupboard units of hotplate height.

When installing next to a tall cupboard, partition or wall, for a minimum distance of 400mm above hotplate level, allow a side clearance of at least 65mm.

The diagram below illustrates the minimum clearance between the cooker and adja- cent walls, cupboards etc.

The wall behind the cooker, 150mm below the hotplate and 450mm above, and the width of the cooker, must be a non-combustible material such as ceramic wall tiles.

If the cooker is to be fitted close to a corner on the left hand side, ensure that there is a clearance of at least 50mm to allow the main oven door to open fully for when remov- ing oven shelves.

400 mm Min

mm Min

 

750

65 mm Min

 

503 mm Min

COOKER HOODS

If a cooker hood is to be installed, refer to the cooker hood manufacturers’ instructions regarding fixing height.

22

Image 22
Contents Oakley Contents Introduction For Your Safety Please read the precautions below before using your cookerFor Your Safety Hotplate To USE the HotplateSafety Requirements for Deep FAT Frying HOW to Deal with a FAT FireTo USE the Grill GrillGrill PAN Handle Relighting the BurnerGrill Oven To USE the OvenStorage and RE-HEATING of Food Cold Start CookingRoasting of Large Poultry ‘COOK CHILL’ DishesOven Cooking Chart Meat and PoultryYeast Mixtures ‘SLOW COOK’ Setting Using the ‘SLOW COOK’ Setting for Slow CookingTo Set Time of Day Clock & Minute MinderTime of DAY is NOW SET To Set the Minute Minder Step Bleeper SoundOven Heat Clean Linings Care and CleaningReplacement of Oven Light Bulb Cooker Finish Cleaning Method Vitreous EnamelProblem Check Something Wrong With Your CookerModel Numbers 10510G, 10512G, 10515G and 10518G Installation InstructionsGAS Safety Installation & USE Regulations LocationTechnical Data Dimensions GeneralSpace for Fixing Cooker HoodsLevelling Connecting to GAS SupplyUnpacking the Cooker Stability BracketElectrical Connection Connect to a 230-240V A.C. Supply onlyInstallation and Operational Checks Page Disposal of Your Product Key Contacts