Inserting the hotplate

The minimum gas supply pressure for checking the regulator setting shall be at least 1“ w.c. (249 Pa) above the inlet specified manifold pressure to the appliance (this operating pressure is 4” w.c. (1.00 kPa) for Natural Gas and 11” w.c. (2.75 kPa) for LP Gas).

ATTENTION: A manual valve shall be installed in an accessible location in the gas line external to the appliance for the purpose of turning on or shutting off gas to the appliance

WARNING: Do not use aerosol sprays in the vicinity of this appliance while it is in operation

After having removed the various loose parts from the internal and external packing, make sure that the hotplate in not damaged and is suitable for the specific gas usage. The gas type label is on the underside of the hotplate base.

In case of doubt, do not use the appliance and contact skilled personnel.

Keep all the packing parts (polystyrene foam, cardboard, staples, etc.) away from children.

Consider the critical dimensions of the appliance, before making an opening in the top surface of the bench top. (relative measurements as per Fig 1- 2).

Requirements

1. Overhead clearances (Minimum values)

The minimum overhead clearances shall be in accordance with the minimum values indicated in the table n.1 and are shown and in the fig. 1- 2

Range hoods and exhaust fans shall be installed in accordance with the manufacturer’s instructions. However, in no case shall the clearance between the top of the highest burner of the cooking appliance and the range hood be less than 30”( 762mm). See Fig. 1- 2.

Any other downward facing combustible surface less than 600mm above the top of the highest burner shall be protected for the full width and depth of the cooking surface area.

However, in no case shall this clearance to any surface be less than 173/4”(450mm.) Maximum depth for the overheads cabinet is 13” (330mm)

2. Side clearances (Minimum values)

The different side clearances shall be in accordance with the minimum values indicated in the table n.1 and are shawn and in the fig. 1- 2

The cooking surface area is defined as that part of the appliance where cooking normally takes place and does not include those parts of the appliance containing control knobs.

Table n.1

Hobs models	B3W0…	Hobs models	B3W0…
Hobs models	B3Y0…	Hobs models	B3Y0…
	B3Y0…		B3Y0…
Min. Clearances	inches (mm)	Min. Clearances	inches (mm)
L1	20 1/2” (520)	L10	35 10/16” (905)
L2	1 9/16“ (40)	L11	36“ (915)
L3	1 9/16“ (40)	W	36 1/2“ (925)
L4	18” (457)	D	21 1/4“ (540)
L5	24” (610)	B1 (*)	1 9/16“ (40)
L6	13” (330)	B2 (*)	6“ (152)
L7	36 1/2“ (925)	B3 (*)	1 3/16” (30)
L8	3/4“ (20)	B4 (*)	6“ (152)
L9	6 3/8” (162)

(*) Note:

-B1 is the min. clearance between the front edge of the appliance and the front edge of the cabinet.

-B2 and B4 are the min. clearance between the left/right side edge of the appliance and the side wall (if present).

-B3 is the min. clearance between the back edge of the appliance and the back wall.

B3W0..U4X(2 OR 5)D, B3Y0..U4X(2 OR 5)D specifications

The Bertazzoni B3Y0..U4X(2 OR 5)D and B3W0..U4X(2 OR 5)D are exemplary products from the prestigious Italian brand Bertazzoni, known for merging aesthetics with practicality in the realm of kitchen appliances. Renowned for their design excellence and superior performance, these models exemplify the brand’s commitment to quality and innovation.

One of the most striking features of the B3Y0..U4X(2 OR 5)D and B3W0..U4X(2 OR 5)D is their distinctive design. The sleek lines and elegant stainless steel finish not only elevate the kitchen’s aesthetic appeal but also ensure durability and ease of maintenance. The ergonomic design allows for comfortable access to the oven's features, making it a joy to use in everyday cooking.

In terms of performance, both models are equipped with advanced cooking technologies that cater to a variety of culinary needs. They feature convection ovens that circulate hot air for even cooking results, ensuring that dishes are perfectly baked and roasted. This technology not only enhances the flavor of food but also significantly reduces cooking times, making meal preparation efficient.

The B3Y0..U4X(2 OR 5)D and B3W0..U4X(2 OR 5)D offer multiple cooking functions, including baking, broiling, and grilling. These functions are designed to provide home chefs with versatility, allowing them to explore various cooking techniques and enjoy a wider range of recipes. The intuitive controls and digital displays make it easy to select the desired cooking mode and monitor progress.

Safety is another paramount consideration in the design of these models. They are equipped with features such as soft-close doors and safety locks, ensuring a secure cooking environment. Additionally, the oven’s insulation technology minimizes heat loss, keeping the exterior cool to the touch, thereby enhancing safety in the kitchen.

Energy efficiency is a key characteristic of the Bertazzoni B3Y0..U4X(2 OR 5)D and B3W0..U4X(2 OR 5)D. Both models are designed to consume less energy while delivering exceptional performance, aligning with modern standards of environmental responsibility.

In conclusion, the Bertazzoni B3Y0..U4X(2 OR 5)D and B3W0..U4X(2 OR 5)D stand out as exemplary kitchen appliances that blend stylish design with cutting-edge technology. Their features cater to both novice and experienced cooks, making them a valuable addition to any kitchen. With a focus on performance, safety, and energy efficiency, these models embody the spirit of culinary innovation that Bertazzoni is celebrated for.