Attaching the hotplate

To prevent liquids from leaking accidentally into the underlying storage space, the appliance is equipped with a special gasket. To apply this gasket, carefully follow the instructions in Fig. 3. Lay out the protective sealing strips along the edges of the opening in the bench top and carefully overlap the strip end. (See Fig. 3). insert the hotplate into the bench top opening. With a screwdriver assemble the brackets A to the hotplate bottom by means of the screws B. (See Fig. 4). Slide the hooks into position and secure them with the screws.

Trim the part of the sealing strips which extend beyond the hotplate base

Gas connection

Before connecting the appliance to the gas supply, first remove the plastic plug on which is press- fitted into the gas inlet union; to remove, just pull it off.

1.Check the ‘gas type’ sticker attached to the hotplate. Details of the injector sizes used are recorded on the data plate located on the base of the appliance.

2.This appliance shall be installed in accordance with installation requirements of the local gas authority of the appropriate installation code.

3.Before installing the hotplate consider the location of the gas supply and routing the gas line.(Refer fig.6)

4.For LPG models the gas supply is connected to the regulator which is supplied loose. The inlet connection has a 1/2” B.S.P. male thread. IT IS ESSENTIAL THAT

THE ELBOW ON THE APPLIANCE BE HELD FIRMLY WITH A SPANNER WHEN CONNECTING THE SUPPLY. DO NOT OVER TIGHTEN. The regulated pressure For LPG is 11” w.c. (See Fig. 5).

5.For NG models the gas supply is connected to the regulator which is supplied loose. The inlet connection has a 1/2” B.S.P. male thread. IT IS ESSENTIAL THAT

THE ELBOW ON THE APPLIANCE BE HELD FIRMLY WITH A SPANNER WHEN CONNECTING THE SUPPLY. DO NOT OVER TIGHTEN. The regulated pressure For NG is 4” w.c. (See Fig. 5).

6.For gas inlet position of appliance refer Fig 5 and 6. After installing the gas supply and making all connections check thoroughly for possible leaks. Turn all control knobs on the unit to ‘OFF’ position. Open the valve on the gas supply. Using a soap and water solution check each gas connection one at the time, by brushing the solution over the connection. Presence of bubbles will indicate a leak. Tighten the fitting and re- check for leaks. If it is not possible to correct the leak, replace fitting. Under no circumstances use matches or flame for checking leaks.

It is essential that the gasket and the pressure test point stopper are properly installed to avoid gas leakage

7.To checking inlet pressure at the appliance operate as follow:

a)Disconnect electric power before pressure checking be carried out.

b)Take off one of the gas burner cap and the relative flame spreader in order to get access to the burner injector.

c)Put in position the pressure detector directly on the burner injector afterward open the relative burner knob at maximum position keeping it pressed, then measure the outlet pressure from the burner injector.

d)Once the pressure checking has been carried out, replace the burner cap and flame spreader in the correct and original position and re-connect electric power to the appliance.

8.Turn on appliance control cock and light each burner. Check for a clear blue flame without yellow tipping. If burners show any abnormalities check that they are located properly and in line with the injector nipple.

9.Sometimes the burners will not ignite immediately and seem to ‘blow’ slightly when they do ignite. This usually due to air in the gas lines, which will clear itself within seconds.

10.If after following the instructions given, satisfactory performance cannot be obtained, contact the local gas authority for advice and assistance.

B3W0..U4X(2 OR 5)D, B3Y0..U4X(2 OR 5)D specifications

The Bertazzoni B3Y0..U4X(2 OR 5)D and B3W0..U4X(2 OR 5)D are exemplary products from the prestigious Italian brand Bertazzoni, known for merging aesthetics with practicality in the realm of kitchen appliances. Renowned for their design excellence and superior performance, these models exemplify the brand’s commitment to quality and innovation.

One of the most striking features of the B3Y0..U4X(2 OR 5)D and B3W0..U4X(2 OR 5)D is their distinctive design. The sleek lines and elegant stainless steel finish not only elevate the kitchen’s aesthetic appeal but also ensure durability and ease of maintenance. The ergonomic design allows for comfortable access to the oven's features, making it a joy to use in everyday cooking.

In terms of performance, both models are equipped with advanced cooking technologies that cater to a variety of culinary needs. They feature convection ovens that circulate hot air for even cooking results, ensuring that dishes are perfectly baked and roasted. This technology not only enhances the flavor of food but also significantly reduces cooking times, making meal preparation efficient.

The B3Y0..U4X(2 OR 5)D and B3W0..U4X(2 OR 5)D offer multiple cooking functions, including baking, broiling, and grilling. These functions are designed to provide home chefs with versatility, allowing them to explore various cooking techniques and enjoy a wider range of recipes. The intuitive controls and digital displays make it easy to select the desired cooking mode and monitor progress.

Safety is another paramount consideration in the design of these models. They are equipped with features such as soft-close doors and safety locks, ensuring a secure cooking environment. Additionally, the oven’s insulation technology minimizes heat loss, keeping the exterior cool to the touch, thereby enhancing safety in the kitchen.

Energy efficiency is a key characteristic of the Bertazzoni B3Y0..U4X(2 OR 5)D and B3W0..U4X(2 OR 5)D. Both models are designed to consume less energy while delivering exceptional performance, aligning with modern standards of environmental responsibility.

In conclusion, the Bertazzoni B3Y0..U4X(2 OR 5)D and B3W0..U4X(2 OR 5)D stand out as exemplary kitchen appliances that blend stylish design with cutting-edge technology. Their features cater to both novice and experienced cooks, making them a valuable addition to any kitchen. With a focus on performance, safety, and energy efficiency, these models embody the spirit of culinary innovation that Bertazzoni is celebrated for.