Bertazzoni B3Y0..U4X(2 OR 5)D manual Service & maintenance instructions, Regulation of burners

Page 6

Regulation of burners

Regulation of the "MINIMUM" on the burners

To regulate the minimum on the burners carry out the following procedure indicated below:

1)Turn on the burner and put the knob onto position MINIMUM ( small flame ).

2)Remove the knob ( Fig. 8) of the tap which is set for standard pressure. The knob is found on the bar of the tap itself.

3)Beside the tap bar on the work top, insert a small slotted screwdriver into the hole on the vale rod (Fig. 8) and turn the choke screw to the right or left until the flame of the burner is regulated in the most suitable way to MINIMUM.

4)Make sure that that the flame does not go out when changing the position quickly from MAXIMUM to the MINIMUM position.

ATTENTION: The regulation described above can be carried out only with burners using natural gas, while with burners using propane gas the screw must be fully screwed in, in a clockwise direction.

Adaptation of the pressure regulator for use with different type of gas

The pressure regulator supplied with the appliance is a convertible type pressure regulator for use with Natural Gas at a nominal outlet pressure of 4” w.c. or LP gas at a nominal outlet pressure of 11” w.c. and it is pre-arranged from the factory to operate with one of these gas/pressure as indicated in the pre-arranging labels affixed on the appliance, package and Instruction booklet.

To convert the regulator for use with the other gas different from which one it is pre-arranged it is enough perform the following operations:

1)Unscrew by hand the upper metal stopper of the regulator (Fig. 5).

2)Unscrew by hand the white plastic piece screwed under the above mentioned metal stopper, afterward screw it again in opposite way under the metal stopper (for gas reference see the written “LP” and “NAT” with relative indicating arrows on the white piece).

3)Screw again by hand the metal stopper in the original position on the regulator.

Operating in this way the gas regulator is converted for use with the other gas/pressure.

Descriptions

DESCRIPTIVE CAPTION FOR HOB

DESCRIPTION OF HOBS

1.

Small Burner

Model ‘A’ Fig. 9

2.

Medium burner

Model ‘B’ Fig. 10

3.Rapid burner

4.Dual burner

5.Front right side of auxiliary burner control knob

6.Front central side of semi-rapid burner control knob

7.Inner dual burner control knob

8.Outer dual burner control knob

9.Rear left side of semi-rapid burner control knob

10.Rear central side of semi-rapid burner control knob

11.Rear right side of rapid burner control knob

12.Front right side of rapid burner control knob

13.Inner dual burner control knob

14.Outer dual burner control knob

15.Rear left side of semi-rapid burner control knob

16.Rear right side of semi-rapid burner control knob

Service & maintenance instructions

Service and maintenance only to be carried out by an authorised person

To replace parts such as burners, valves and electric components, the hotplate must be removed from the bench top by releasing the attachment hooks, loosening the attachment screws of each burner, unscrewing the hotplate attachments nuts which are visible at the bottom of the surface, removing the hotplate top and finally replacing the defective parts.

Note: if the valves must be replaced, first disassemble the ignitions switches wires.

It is recommended to replace the valve gaskets each time the valve is replaced, thus ensuring a perfect seal between the body and the gas train.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Installation, Service and User Instructions French version Installation instructions IndexInserting the hotplate RequirementsAttaching the hotplate Gas connectionWiring diagrams Wiring diagram descriptionElectrical connection Descriptions Service & maintenance instructionsRegulation of burners Regulation of the Minimum on the burnersUser instructions Using burnersTips for using burners correctly Greasing the valvesCleaning the appliance Table B Burner Recommended pan diameters inches mmCorrect usage of pans After sale service Name PhoneDealer /Importer Name, address, phone Installation, Service et Instructions pour l’Utilisateur Instructions pour l’installation Figures………………………………………………...…………..……………………pagesDistances des meubles suspendus Valeurs minimum Insertion de la table de cuissonExigences Distances latérales Valeurs minimumFixation de la table de cuisson Branchement du gazBranchement électrique Description du schéma de câblage Schémas de câblageTableau a Adaptation aux différents types de gaz Modèle B3W0..U4X2 or 5DInstructions de service et d’entretien Réglage des brûleursRéglage du Minimum sur les brûleurs Instructions pour l’utilisateur Graissage des valvesUtilisation des brûleurs Nettoyage de l’appareil Suggestions pour une utilisation correcte des brûleursUtilisation correcte des casseroles Service après vente Nom TéléphoneRevendeur /Importateur Nom, adresse, téléphone Inches Fig.9 Page Spare Parts List Liste DE Pieces DE Detachees Page

B3W0..U4X(2 OR 5)D, B3Y0..U4X(2 OR 5)D specifications

The Bertazzoni B3Y0..U4X(2 OR 5)D and B3W0..U4X(2 OR 5)D are exemplary products from the prestigious Italian brand Bertazzoni, known for merging aesthetics with practicality in the realm of kitchen appliances. Renowned for their design excellence and superior performance, these models exemplify the brand’s commitment to quality and innovation.

One of the most striking features of the B3Y0..U4X(2 OR 5)D and B3W0..U4X(2 OR 5)D is their distinctive design. The sleek lines and elegant stainless steel finish not only elevate the kitchen’s aesthetic appeal but also ensure durability and ease of maintenance. The ergonomic design allows for comfortable access to the oven's features, making it a joy to use in everyday cooking.

In terms of performance, both models are equipped with advanced cooking technologies that cater to a variety of culinary needs. They feature convection ovens that circulate hot air for even cooking results, ensuring that dishes are perfectly baked and roasted. This technology not only enhances the flavor of food but also significantly reduces cooking times, making meal preparation efficient.

The B3Y0..U4X(2 OR 5)D and B3W0..U4X(2 OR 5)D offer multiple cooking functions, including baking, broiling, and grilling. These functions are designed to provide home chefs with versatility, allowing them to explore various cooking techniques and enjoy a wider range of recipes. The intuitive controls and digital displays make it easy to select the desired cooking mode and monitor progress.

Safety is another paramount consideration in the design of these models. They are equipped with features such as soft-close doors and safety locks, ensuring a secure cooking environment. Additionally, the oven’s insulation technology minimizes heat loss, keeping the exterior cool to the touch, thereby enhancing safety in the kitchen.

Energy efficiency is a key characteristic of the Bertazzoni B3Y0..U4X(2 OR 5)D and B3W0..U4X(2 OR 5)D. Both models are designed to consume less energy while delivering exceptional performance, aligning with modern standards of environmental responsibility.

In conclusion, the Bertazzoni B3Y0..U4X(2 OR 5)D and B3W0..U4X(2 OR 5)D stand out as exemplary kitchen appliances that blend stylish design with cutting-edge technology. Their features cater to both novice and experienced cooks, making them a valuable addition to any kitchen. With a focus on performance, safety, and energy efficiency, these models embody the spirit of culinary innovation that Bertazzoni is celebrated for.
Top Page Image Contents