Best IS170 manual Installation of Glass, Connect Ductwork

Page 9

INSTALLATION OF GLASS

FRAME (Optional)

Purchase a Glass Frame from your dealer (Model GSIS170).

1.Fit the glass frame above the hood.

2.Fit the supplied adhesive pads on the glass frame in correspondence to its fixing screws in order to prevent the glass from breaking.

3.Fix the (3) supplied brackets to the hood with mounting screws (3.9x6mm).

4.Adjust the position of the glass frame and fix it by means the mounting screws (M4x20mm).

Please be very careful not to hit the glass with any objects made of porcelain, metal, glass or anything else that is very heavy.

MOUNTING SCREWS

(3.9x6mm)

SUPPLIED

BRACKETS

GLASS FRAME

MOUNTING SCREWS (M4x20mm)

ADHESIVE

PADS

CONNECT DUCTWORK

1.Position the hood near the lower part of the support frame and connect the duct to the duct collar.

2.Use 6" round metal duct to connect the duct collar on the hood to the ductwork above.

3.Use duct tape to make all joints secure and air tight.

DUCT 6”

DUCT COLLAR

- 9 -

Image 9
Contents Français Español Model IS170Page Intended for Domestic Cooking only ! Warning Read and Save These InstructionsPage Prepare the Hood Install Support System Install the DuctworkConnect Decorative Flue Non-ducted recirculation configuration Connect Ductwork Installation of GlassWiring NON-DUCTED Recirculation Filter InstallationMount Hood to Support Frame Hood Cleaning MaintenanceGlass Cleaning Grease FiltersControls OperationSwitch OFF the Electricity Supply Fuse ReplacementHalogen Bulbs HOTBroan ONE Year Limited Warranty WarrantySeulement Pour Utilisation Domestique Avertissements Lisez ET Conservez CES InstructionsPage Preparez LA Hotte Installation DU Systeme DE Support Installation DU Systeme D’EVACUATIONModèle avec tuyau d’évacuation Assemblage DU Conduit DecoratifModèle recyclant l’air Option Montage DE LA VitreInstallation Electrique Connexion DU Systeme D’EVACUATIONMontage DE LA Hotte SUR LA Structure DE Support Entretien Assemblage DU FiltreFiltres anti-graisse Filtre à charbonCommandes FonctionnementAvertissement Ampoules Halogenes Remplacement Fusible’AMPOULE Peut Etre Chaude Débranchez L’APPAREILGarantie Broan Limitée À UN AN GarantieAdvertencia LEA Y Conserve Estas InstruccionesAdvertencia Prepare LA Campana Instalacion DEL Sistema DE Sujecion Instalacion DEL Tubo DE ExtraccionInstalacion DEL Tubo Decorativo Configuración con tuboConfiguración sin tubo Tubo DE Extraccion DE Humos Montaje DEL CristalMontaje DE LA Campana AL Armazón DE Soporte Instalacion ElectricaInstalacion DEL Filtro Filtros antigrasa MantenimientoFiltro al carbón Limpieza de la campanaMandos FuncionamientoHeat Sentrymr AvertenciaSustitucion Fusible Lamparas HalogenasPueden Estar Calientes Desconectar EL AparatoGarantia Broan POR UN AÑO GarantiaDescription Service PartsPart N Description Liste Pieces DE RechangeCÓD. N Pieza N Descripción Lista DE Piezas DE RecambioModel IS170 Heat Sentry Page 04307109/4S