Installation | ..... tighten securely the two screws on upper |
brackets, check that blower housing is now well | |
blocked, then, from the inside of the hood, fix | |
definitively the lower brackets with one screw each. | |
Adjusting | |
screws | |
|
10.Refinish the installation to cabinet with two fixing screws.
Upper + lower bracket definitive fixing screws
Final fixing screw
Final fixing screw
For Ductless (recirculating) installations Cabinet without ceiling ONLY:
Install the deflector (available as an extra kit) on the transition - snap into place.
11.Connect ducting to transition. Seal with duct tape. Do not use duct smaller than the transition.
For Ductless - recirculating - installations:
Cabinet with ceiling ONLY:
provide and install a section of duct long enough to connect hood transition to deflector once this has been installed onto the cabinet ceiling (the deflec- tor is available as an extra kit).
12