Zephyr EGL-E30AS, EGL-E36AS manual List of Materials, Parts Supplied, Parts not Supplied

Page 6

List of Materials

PARTS SUPPLIED:

Blower unit housing

Hood canopy

Metal filter x 1

Halogen light bulb x 2

Hardware Packet: Transition

Allen spanner x 1 Lower bracket x 2 Upper Bracket x 2

Use, Care and Installation guide Template

Cloth

2,9x9,5 screws x 2 (to fix the transition)

4,5x16 screws x 4 (2 to fix the drawer to the bottom of the cabinet + 2 to fix the deflector on top of the cabinet ceiling) 5x18 screws x 4 (upper/lower brackets adjusting screws)

3,5x9,5 x 4 (for definitive fixing of upper/lower brackets.

PARTS NOT SUPPLIED

Duct, conduit and all tools required for installation.

Remote Control

Ductless Recirculating Kit

to be used only in the Ductless (recirculating) version

includes: charcoal filter, charcoal filter support and fixing bracket, deflector

6

Image 6
Contents Use, Care, and Installation Guide Page Table of Contents Important safety Notice OperationElectrical & Installation requirements Before Installing the HoodElectrical Requirements List of Materials Parts SuppliedParts not Supplied Dimensions and clearances Ductless recirculating version 3/8Venting Methods Installation InstructionsClosely follow the instructions set out in this manual PreparationInstallation Ductwork Calculation Sheet Installation Cabinet with ceilingInstallation Adjusting Electrical connection Failure to do so can result in death or electrical shockDescription of the hood Description of control panel Reset filter saturation signalControls Controlling the range hood with sliding glassGrease Filter MaintenanceCleaning Replacing the Light BulbTrouble Shooting Issue Cause What to doWarranty To Obtain Service Under WarrantyList of Part and Accessories GF02ZAZRC-00GL