TC electronic SDN BHD 48 user manual Important Safety Instructions, Service

Page 3

IMPORTANT SAFETY INSTRUCTIONS

The lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage”

within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in

the literature accompanying the product.

1Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11 Only use attachments/accessories specified by the manufacturer.

12Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13Unplug this apparatus during lightning storms or when unused for long periods of time.

14Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Warning!

•To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture and objects filled with liquids, such as vases, should not be placed on this apparatus.

•This apparatus must be earthed.

•Use a three wire grounding type line cord like the one supplied with the product.

•Be advised that different operating voltages require the use of different types of line cord and attachment plugs.

•Check the voltage in your area and use the correct type. See table below:

Voltage

Line plug according to standard

110-125V UL817 and CSA C22.2 no 42.

220-230V CEE 7 page VII, SR section

107-2-D1/IEC 83 page C4.

240V BS 1363 of 1984. Specification for 13A fused plugs and switched and unswitched socket outlets.

•This equipment should be installed near the socket outlet and disconnection of the device should be easily accessible.

•To completely disconnect from AC mains, disconnect the power supply cord from the AC receptacle.

•The mains plug of the power supply shall remain readily operable.

•Do not install in a confined space.

•Do not open the unit – risk of electric shock inside.

Caution:

You are cautioned that any change or modifications not expressly approved in this manual could void your authority to operate this equipment.

Service

•There are no user-serviceable parts inside.

•All service must be performed by qualified personnel.

a

Page 2 Page 4
Image 3
Page 2 Page 4
Contents User’s Manual Page Service Important Safety InstructionsFor Customers in Canada EMC / EMI & Certificate of ConformityTable of Contents World-class DSP effects Introduction24/8 channel digital mixer with double precision summing Speaker management based on AIR technologyComputer Requirements Setup NotesFront Panel Valid LED FireWire/Power LED indicatorPhantom Power +48V MetersRear Panel Remote FireWire connectorsControl Panel Mixer Removing a channel Konnekt select tabsTabs Add ChannelAll Channels Selecting talkback microphone Output sectionLinked Unlinked Monitor mix on/off Talkback function Talkback microphoneTalk button Fabrik C studio even on talkbackDim level Talkback routingMaster Level Channel Setup Stand-Alone Clock Settings Input sectionOptical Format Source select Routing Channels to OutputsIntroduction basics Link buttonAssigned to DAWDSP Speaker or Line level ?Bass management Bass Management 16 + 17 High Pass & Low PassLevels Setup Examples Studio Recording & Monitoring Features used in this setup Mainl LINE8 Setup Examples Bass Management & IntegrationSetup Examples Bass Management & Integration Integrator Parameters Integrating external hardware with your DAW ConnectionsObjects Setting up Konnekt WDM DriverTC Near WDM System Settings Buffer SizeClock Example 2 Studio Konnekt 48 Jitter Elimination DPC Safety Buffers PC only Sample RatePrevent from changing sample rate Check for update +7 Clock Recovery and StatusStudio Kontrol Optional Studio Kontrol Momentary or latching Encoder and LightringSpeaker SET select AUX 2 Shift + EffectStudio Control Tuner Shift + TalkCH on/off Channel on/off Studio Control Remote Effect button Reverb TIME/DECAYMidi Main features Fabrik C StudioIntroduction Fabrik C Overview Full-band or 3-band compression?Band compression on Bass Headroom LimiterEQ Section De-EsserSignal Flow Full-band mode Signal Flow 3-band modeBypass Adjusting Frequency and gainAdjusting BW/TYPE Bands On/Off Grab handle to selectNotch Filter Narrow type Filter typesType GainBand and Full-band modes Gain Gain Control Source selectionCompression Via the drop down menu Source SelectionBand mode only Level Level Control Band mode only Compressor Control Compressor controlAdjusting Parameters Compressor section Full-band modeGrid Amount ThresholdRouting modes Overview Fabrik R StudioReverb Types Overload indication Tweak sectionMeters Level Color Modulation TimeModulation Rate PreDelayTime Modulation DecayColor Additional parameters In/OutKill Dry Kill wet P1, P2 & P3 Preset Handling Fabrik C & Fabrik RPreset Handling Preset File MenuPage Basic operation Resonance FilterOutput FilterCommunication Example Cross fade between two tracks Tuner Indication TunerScale modes Mode selectorPlay tone PitchOutputs Appendix Asio Channel NamesMonitor Speaker Studio Konnekt 48 Signal FlowShortcut keys Appendix FAQVersions Firmware Update & Resetto DefaultReset to Default Check for updatesTHD Technical Specifications

48 specifications

TC Electronic SDN BHD 48 is a cutting-edge digital signal processing system designed to deliver high-quality audio solutions for various applications including live sound, broadcasting, and installation projects. This advanced system is a testament to TC Electronic’s commitment to innovation and excellence in the audio industry.

One of the standout features of the SDN BHD 48 is its unique digital audio processing engine which utilizes advanced algorithms to achieve superior sound quality. This engine allows users to manipulate and enhance audio signals in real-time, resulting in exceptional sonic clarity and detail. The system supports up to 48 channels of processing, making it versatile enough for any large-scale audio operation.

SDN BHD 48 comes equipped with an intuitive user interface that provides easy access to a plethora of controls and settings. Users can navigate through the system seamlessly, making adjustments on the fly. This user-centric design ensures that audio engineers can focus more on the sound rather than getting bogged down in complex operational tasks.

The system also incorporates state-of-the-art connectivity options, including a robust networked audio protocol which allows for seamless integration with other digital devices. This opens the door to myriad configuration possibilities and enables users to customize their setup according to specific needs. The SDN BHD 48 supports various protocols such as AES67 and Ravenna, ensuring compatibility with a wide range of equipment.

In terms of signal routing, SDN BHD 48 offers flexible options that allow for both simple and complex configurations. This means that users can easily set up audio signals for different areas or zones, making it ideal for installations in large venues like concert halls and hotels.

Robustness is also a key characteristic of the SDN BHD 48. Built to withstand the rigors of touring and professional use, it boasts a rugged chassis and high-quality components that enhance durability. Additionally, the system provides extensive monitoring and diagnostic capabilities so users can ensure optimal performance and troubleshoot issues quickly.

In summary, TC Electronic SDN BHD 48 merges state-of-the-art audio technology with user-friendly features, making it an indispensable tool for professionals who demand high performance from their audio systems. With its advanced processing capabilities, connectivity options, and robust design, it stands out as a leading solution in the competitive audio technology market.
Top Page Image Contents