TC electronic SDN BHD 48 user manual Technical Specifications, Thd

Page 72

TECHNICAL SPECIFICATIONS

Digital Inputs and Outputs

 

Max Output Level:

+13 dBu

Connector (S/PDIF):

RCA Phono, 75 Ohm

THD:

< -95 dB (0.002%) @ 1 kHz, -1 dBFS

Formats (S/PDIF and TosLink):

S/PDIF (24 bit), IEC 958, Pro-status bits

Dynamic Range:

< -103 dB(A), 20 Hz to 20 kHz

Connector (ADAT® or TosLink):

Optical Pipe

Freq. Response:

+0/-0.3 dB, 20 Hz to 20 kHz < -90 dB,

Format (ADAT®):

8-ch. @ 48 kHz, 8-ch. SMUX @ 96 kHz

Crosstalk:

20 Hz to 20 kHz

Connector (Word Clock IO):

BNC, 75 Ohm, 1 x Fs, 2.5 Vpp terminat-

 

 

 

ed, rising edge reference

Main Output 1,2

 

FireWire (format):

IEEE 1394a, S400, IEC 61883

Connectors:

XLR. Balanced.

FireWire (channels):

30 to and 28 from the DAW

Impedance:

100 Ohm

Digital IO Engine:

TC DICE II, handling all IO formats

Max Output Level:

+13 dBu (analog gain scale)

 

 

THD:

< -93 dB (0.002%) @ 1 kHz, -1 dBFS

Clock and Jitter

 

Dynamic Range:

< -103 dB(A), 20 Hz to 20 kHz

Internal Sample Rates:

44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz,

Freq. Response:

+0/-0.1 dB, 20 Hz to 20 kHz

 

176.4 kHz and 192 kHz

Crosstalk:

< -99 dB, 20 Hz to 20 kHz

Internal Clock Precision:

+/- 30 PPM

 

 

External Sample Rates:

43 to 193 kHz, jitter rejection at all rates

DAC

 

Jitter Rejection Engine:

JET™ technology in TC DICE II

D to A Conversion:

24 bit, 128 x Oversampling Bitstream

Jitter Rejection Filter:

< -3 dB @ 10 Hz, < -100 dB @ 600 Hz

D to A Delay @ 192/96/48 kHz:

0.1/0.2/0.4 ms

DIO Interface Jitter:

< 1 ns peak, BW: 700 Hz to 100 kHz

 

 

AD/DA Conversion Jitter:

< 42 ps RMS, BW: 100 Hz to 40 kHz

Headphones Output (Ch. 3/4, 11/12)

 

Digital Output Phase

 

Connectors:

2 x 1/4” TRS Jack (Stereo)

(stand alone and across network):

< 0.5% of Sample Period

Impedance:

80 Ohm

Input Slip Sample Tolerance (all DIs):

+50% to -50% of Sample Period

Max Output Level:

+18 dBu (analog gain scale)

Processing Delay DIO @ 192/96/48 kHz:

0.09/0.19/0.38 ms

THD:

< -90d B (0.003%) @ 1 kHz, -1 dBFS

Frequency Response DIO:

DC to 23.9 kHz 0.01 dB @ 48 kHz

Dynamic Range:

< -101 dB(A), 20 Hz to 20 kHz

 

 

Freq. Response:

+0/-0.2 dB, 20 Hz to 20 kHz

Line Inputs Ch. 5 – 12

 

Crosstalk:

< -90 dB, 20 Hz to 20 kHz

Connectors:

1/4” TRS Jack (Balanced)

 

 

Impedance, Bal/Unbal:

20 kOhm/25 kOhm

Power @ 40 Ohm Load:

200 mW

Max Input Level (incl. PAD):

+13 dBu or +25 dBu

Power @ 600 Ohm Load:

93 mW

THD:

< -90 dB (0.003%) @ 1 kHz, -1 dBFS

 

 

Dynamic Range:

< -101 dB(A), 20 Hz to 20 kHz

EMC

 

Freq. Response:

+0/-0.5 dB, 20 Hz to 20 kHz

Complies With:

EN 55103-1 and EN 55103-2, FCC part 15,

Crosstalk:

< -95 dB, 20 Hz to 20 kHz

 

Class B, CISPR 22, Class B

 

 

Safety

 

ADC

 

Certified To:

IEC 60065, EN 60065, UL6500 and CSA

A to D Conversion:

24 bit, 128 x Oversampling Bitstream

 

E60065 CSA FILE #LR108093

A to D Delay @ 192/96/48 kHz:

0.15/0.3/0.61 ms

 

 

 

 

Environment

 

Mic. Inputs Ch. 1,2,3,4

 

Operating Temperature:

32° F to 122° F (0° C to 50° C)

Connectors:

Neutrik Combo (XLR)

Storage Temperature:

-22° F to 167° F (-30° C to 70° C)

Sensitivity Full Range Pad on/off:

-10/+10 dBu <> -52/ -32 dBu

Humidity:

Max. 90% non-condensing

Total Preamp gain:

62 dB

 

 

Impedance, Pad on/off:

2000/1300 ohm

Control Interface

 

NF @ Rg = 150 ohm, Max. Gain:

< 3 dB

MIDI:

In/Out: 5 Pin DIN

EIN @ Rg = 150 ohm, Max. Gain:

< -128 dBu

FireWire (DAW):

IEEE 1394a, IEC 61883

THD, Min. Gain:

< -95 dB (0.002%) @ 1 kHz, -1 dBFS

 

 

Dynamic Range, Min. Gain:

< -106 dB(A), 20 Hz to 20 kHz

General

 

Crosstalk:

< -75 dB, 20 Hz to 20 kHz

Dimensions:

19" x 1.75" x 7.3" (483 x 44 x 185 mm)

 

 

Weight:

5.5 lb. (2.5 kg)

Inst. Inputs Ch. 1,2,3,4

 

Finish:

Anodized aluminum front panel. Plated

Connectors:

Neutrik Combo (1/4” TRS Jack)

 

and coated steel back/top plate.

Sensitivity Range:

-25 dBu <> +17 dBu

PPM Meter (Ch. 1 – 4):

6 LEDs pr. mono channel.

Total Preamp gain:

42 dB

Stereo PPM (Ch. 5 – 12):

6 LEDs pr. stereo channel.

Impedance:

1 Mohm

Mains Power Supply:

90 to 240 VAC, 50 to 60 Hz (Auto Select)

THD, Min. Gain:

< -93 dB (0.002%) @ 1 kHz, -1 dBFS

FireWire Bus Powered:

No

Dynamic Range, Min. Gain:

< -105 dB(A), 20 Hz to 20 kHz

 

 

Crosstalk:

< -90 dB, 20 Hz to 20 kHz

Power Consumption:

<25 W

Line Outputs Ch. 5 – 12

 

Warranty Parts and labor:

1 Year

Connectors:

1/4” TRS Jack. Balanced/unbalanced.

 

 

Impedance:

100 Ohm

 

 

70

Image 72
Contents User’s Manual Page Important Safety Instructions ServiceEMC / EMI & Certificate of Conformity For Customers in CanadaTable of Contents Introduction 24/8 channel digital mixer with double precision summingSpeaker management based on AIR technology World-class DSP effectsSetup Notes Computer RequirementsFront Panel FireWire/Power LED indicator Phantom Power +48VMeters Valid LEDRear Panel FireWire connectors RemoteControl Panel Mixer Konnekt select tabs TabsAdd Channel Removing a channelAll Channels Output section Linked Unlinked Monitor mix on/offTalkback function Talkback microphone Selecting talkback microphoneFabrik C studio even on talkback Dim levelTalkback routing Talk buttonMaster Level Channel Setup Stand-Alone Clock Settings Input sectionOptical Format Routing Channels to Outputs Introduction basicsLink button Source selectDAW DSPSpeaker or Line level ? Assigned toBass management Bass Management 16 + 17 High Pass & Low PassLevels Setup Examples Studio Recording & Monitoring Features used in this setup Setup Examples Bass Management & Integration Mainl LINE8Setup Examples Bass Management & Integration Integrator Parameters Integrating external hardware with your DAW ConnectionsObjects Setting up Konnekt WDM DriverTC Near WDM System Settings Buffer SizeClock Example 2 Studio Konnekt 48 Jitter Elimination DPC Safety Buffers PC only Sample RatePrevent from changing sample rate +7 Clock Recovery and Status Check for updateStudio Kontrol Optional Studio Kontrol Encoder and Lightring Speaker SET selectAUX 2 Shift + Effect Momentary or latchingStudio Control Tuner Shift + TalkCH on/off Channel on/off Studio Control Remote Effect button Reverb TIME/DECAYMidi Main features Fabrik C StudioIntroduction Fabrik C Overview Full-band or 3-band compression?Band compression on Bass Limiter EQ SectionDe-Esser HeadroomSignal Flow 3-band mode Signal Flow Full-band modeAdjusting Frequency and gain Adjusting BW/TYPEBands On/Off Grab handle to select BypassFilter types Notch Filter Narrow typeGain TypeSource selection CompressionVia the drop down menu Source Selection Band and Full-band modes Gain Gain ControlBand mode only Compressor Control Compressor control Band mode only Level Level ControlAdjusting Parameters Compressor section Full-band modeGrid Threshold AmountRouting modes Fabrik R Studio OverviewReverb Types Tweak section MetersLevel Color Modulation Time Overload indicationPreDelay Time ModulationDecay Modulation RateColor Additional parameters In/OutKill Dry Kill wet Preset Handling Fabrik C & Fabrik R Preset HandlingPreset File Menu P1, P2 & P3Page Resonance Filter Basic operationFilter OutputCommunication Example Cross fade between two tracks Tuner Tuner IndicationMode selector Play tonePitch Scale modesAppendix Asio Channel Names OutputsStudio Konnekt 48 Signal Flow Monitor SpeakerAppendix FAQ Shortcut keysFirmware Update & Resetto Default Reset to DefaultCheck for updates VersionsTechnical Specifications THD

48 specifications

TC Electronic SDN BHD 48 is a cutting-edge digital signal processing system designed to deliver high-quality audio solutions for various applications including live sound, broadcasting, and installation projects. This advanced system is a testament to TC Electronic’s commitment to innovation and excellence in the audio industry.

One of the standout features of the SDN BHD 48 is its unique digital audio processing engine which utilizes advanced algorithms to achieve superior sound quality. This engine allows users to manipulate and enhance audio signals in real-time, resulting in exceptional sonic clarity and detail. The system supports up to 48 channels of processing, making it versatile enough for any large-scale audio operation.

SDN BHD 48 comes equipped with an intuitive user interface that provides easy access to a plethora of controls and settings. Users can navigate through the system seamlessly, making adjustments on the fly. This user-centric design ensures that audio engineers can focus more on the sound rather than getting bogged down in complex operational tasks.

The system also incorporates state-of-the-art connectivity options, including a robust networked audio protocol which allows for seamless integration with other digital devices. This opens the door to myriad configuration possibilities and enables users to customize their setup according to specific needs. The SDN BHD 48 supports various protocols such as AES67 and Ravenna, ensuring compatibility with a wide range of equipment.

In terms of signal routing, SDN BHD 48 offers flexible options that allow for both simple and complex configurations. This means that users can easily set up audio signals for different areas or zones, making it ideal for installations in large venues like concert halls and hotels.

Robustness is also a key characteristic of the SDN BHD 48. Built to withstand the rigors of touring and professional use, it boasts a rugged chassis and high-quality components that enhance durability. Additionally, the system provides extensive monitoring and diagnostic capabilities so users can ensure optimal performance and troubleshoot issues quickly.

In summary, TC Electronic SDN BHD 48 merges state-of-the-art audio technology with user-friendly features, making it an indispensable tool for professionals who demand high performance from their audio systems. With its advanced processing capabilities, connectivity options, and robust design, it stands out as a leading solution in the competitive audio technology market.