T+A Elektroakustik DD 1535 R manual SpeakerPositionMenu, Recommendedloudspeakerarrangement

SpeakerPositionMenu

In the 'Speaker Position Menu' you can enter the distance from the listening position (in 0.3 m increments) for each loudspeaker separately.

This enables the decoder to compensate for timing discrepancies due to differences in speaker location.

Recommendedloudspeakerarrangement

5.1 Loudspeaker set

7.1Loudspeaker set

Front Box		Front Box
left		right
	TV
		Sub-woofer

Centre

30° 30°

60°60°

45°45°

Surround		Surround
left	90°	right

Back speaker	Back speaker
left	right

Select menupoint

Spk position

Front left	2.40 m
Front center	2.10 m
Front right
	2.40 m
Surnd right
	2.40 m
Back right
	2.40 m
Back left
	2.40 m
Surnd left
	2.40 m
Subwoofer
	2.40 m

return to Loudspeaker menu

￿ / ￿ / / / STOP

OK

Measure the distance between the listening position and the loudspeakers in your surround system, and enter the measured distances.

Note:

The maximum distance of a loudspeaker to the listening position is 12 m. For acoustic reasons greater distances cannot be recommended, and the system cannot compensate for timing errors over a range greater than 12 m.

As the illustration shows, you use the select buttons to move to the input positions in the following sequence.

Output channels not in use (see 'Loudspeaker Menu') cannot be edited.

Use the change buttons to enter the measured distance in increments of 0.3 m.

• Main loudspeaker front left		(frontleft )
• Center loudspeaker front center		(frontcentre )
• Main loudspeaker front right		(frontrear )
•	Surround loudspeaker right	(surndright )
•	Back loudspeaker right	(backright )
•	Back loudspeaker left	(backleft )
• or back loudspeaker centre		(backcentre )
•	Surround loudspeaker left	(surndleft )
• Active subwoofer (any position)		(Sub)

21