Sunfire TGR-401-230 manual System Configurations, Analog Audio and Composite Video VCR

Page 15

CHAPTER 2

System Configurations

The following pages show some typical connections that you might make in your installation. They show how the inputs and outputs of the TGR-401 are connected to various audio and video components.

Analog Audio and Composite Video (VCR)

Composite video signal from TGR-401 MON composite video output to TV Monitor's composite video input

	Composite video signal
	From: VCR video output	Analog audio signals
	To: TGR-401 IN1 video input	Analog audio signals
	To: TGR-401 IN1 video input	From: VCR audio outputs
		From: VCR audio outputs
		To: TGR-401 IN1 L/R audio inputs

VCR Player

When this input is selected from the front panel or the remote control, the VCR’s audio will play in your system and the video is sent to the TV.

As with all the video connections that follow, you must make sure that your TV monitor is set to look at its correct video input or you will not see the picture.

If your TV and other video compo- nents have S-Video connections, use them, as they provide better picture quality than composite video.

User's Manual

15

Image 15

Contents Theater Grand Receiver TGR-401 TGR-401-230 Safety Important Safety InstructionsNEC National Electrical Code Contents Introduction Unpacking Overview Quick Start Guide Automatic SetupEQ Adjustment OSD MenusConclusion Front Panel Features Digital Input IR Receiver WindowMain Select Zone 2 SelectHdmi Rear Panel FeaturesVIA!migo Port Power SwitchDigital Connections 11. TP1 and TP2Connection Tips InstallationAC Power Considerations CareAnalog Audio and Composite Video VCR System ConfigurationsDigital Audio and Component Video Connections DVD AM Loop Antenna CD and Antenna ConnectionsTape Player Connections Channel Analog Input Connections Blu-ray or HD-DVD Component Video with Digital Audio Front Panel Input ConnectionsLine-Level Outputs Output ConnectionsSurround Back Outputs Left/Right 2 OutputsSurround 2 Outputs Zone 2 OSD menus Zone 2 ConnectionsOlé-2SF Touchpads Optional ConnectionsSirius Satellite Radio VIA!migo iPod dockRemote Control MainFAV Zone Operating the TGR-401 with the RemotePRO Remote SetupLight Remote SetupPunch EraseMacro Recal RecallEdit Hiding and Adding Pages Chapter CloneOn Screen Display OSD OSD ActivationQuick Information OSD Menus See next OSD Menus Trims, Tone, Modes, Presets, Setup InputOSD Menus Setup, Inputs Next OSD Menus SetupOSD Menus Setup/Speakers/EQ Input settings Using the TGR-401Video Conversion Bass ManagementManual Setup Automatic Setup Procedure Manual EQ adjustment Automatic and Manual EqualizationAuto EQ Surround Modes for 2-Channel Sources Mode SelectionDolby Digital Surround Modes for Multi-Channel SourcesDTS Digital Surround To summarize Sonic HolographySaving Presets FM and AM Tuner OperationChanging Modes Recording to a Tape Player RecordingZone 2 OSD menu IndicatorsZone 2 Operation Turning on ZoneTrigger OSD Menu TriggersFront Speakers Speaker PlacementAppendix AppendixSubwoofer Location Surround SpeakersLS1/LS2 Options Surround Back SpeakersRS-232 Port No sound from one or more speakers Troubleshooting GuideNo Dolby Digital, DTS playback Updating firmware problems Remote control P-Pro on Remote Control Codes seeDVD Recorders Changers Specifications Default Input Table Optional VIA!migo iPod Dock Screensaver Off Using the VIA!migoTnmod Optional Sirius Satellite Radio TunerActivation Setting presetsResetting channel skipping and channel locking Sirius Tuner Operating InstructionsTroubleshooting General tuning and useLED Optional Olé-2SF TouchpadsService Assistance Sunfire Limited WarrantyManual part number Rev A2

Related manuals

Manual 69 pages 32.01 Kb