CHAPTER 3
CLONE
This feature allows you to easily copy all of the commands and labels from one Sunfire remote (of the same type) to another.
1.Set both remotes on a flat surface, with their IR windows pointing towards each other, about 1 or 2 inches apart.
2.In the SETUP menu for both remotes, press CLONE and the display will change to show SEND,
RCV (receive) and EXIT.
3.Press SEND on the remote you want to copy from.
4.Press RCV on the remote you want to copy to.
5.When you are ready, press START on both remotes. It may take up to 40 seconds, so do not move the remotes during this time. The remote will flash “GOOD” if it has successfully learned all the com- mands. If it flashes “FAIL,” then repeat this procedure.
6.Press MAIN to return to the main menu.
Hiding and Adding Pages
1.In the SETUP menu, press EDIT, and the display shows TEXT and PAGE.
2.Press the PAGE button on the right.
3.Press the DEVIC button and choose a device button. Use PAGE to navigate to the page of the de- vice to hide.
4.The top of the screen indicates “ADD?” or “HIDE?” Press the LIGHT button on the remote's right side to toggle between hide and add. The current page can be hid- den, or recalled (added) later.
5.Repeat steps 3 and 4 to hide or add other pages. Press MAIN to return to normal operation.
6.To hide one of the MAIN pages, select MAIN in step 3 instead of DEVIC, then follow step 4 to hide it.
30
User's Manual