Sirius Tuner Operating Instructions

APPENDIX

MAIN

ONOFF

ZONE 2

TGR401

Activation:

1. Select the SIRIUS Input using the

front input button and rotating the

manual selector knob, or with the

remote control.

2. You will need your SIRIUS Satel-

lite Radio ID which you can get by

tuning to Channel 0. The first time

you power up your TGR-401 with a

Setting presets:

1. Presets may only be configured

using the Setup Menu. Press

MENU to enter Setup, then navi-

gate to PRESETS/SIRIUS. A list

of 1-40 will appear with zeros after

them. At the bottom is NEXT... to

take you to the next sequence of

preset channel numbers. Navigate

down to CH 1 and use NAV RIGHT

PAGE

VOLUME

MUTE

NAV UP

NAV LEFT

NAV DOWN

PAGE MAIN FAV

MUTE CH

VOL

GUIDE

INFO

MENUEXIT

SEL

1 2 3

4 5 6

7 8 9

+10 0 ENT

CH UP/DOWN

INFO

NAV RIGHT

NAV SELECT

SIRIUS tuner, it will tune to channel

184 within 15 seconds. Press 000

on the remote control num keypad.

The tuner will now go to channel

0 and display CH> SiriusID. Press

the INFO key to cycle through

Category (CAT), Artist (ART) and

Song Title (TTL). After TTL>, will

be your SIRIUS Satellite Radio 12-

digit ID number. Write this down.

It is also located on the underside

of your SIRIUS tuner module on

a sticker in a text chain starting

with SID: XXXXXXXXXXXX. If you

keep pressing the INFO button you

will get Composer (CMP>) and the

playmode (Stereo by default).

3. Press Tune Up (NAV UP) to go

to channel 184. This is a weather

channel and also a subscription ac-

tivation channel. Call SIRIUS using

the number on the SIRIUS insert

card that came with your TGR-401

unit. Once you sign up, they will

activate your tuner within a short

time. You must leave the TGR-401

turned on and the SIRIUS tuner set

to channel 184 until activated.

to increment to the channel you

want for preset number 1. Refer to

the channel guide that came with

the tuner kit to pick your presets,

or listen to assorted channels first

while writing down a list of chan-

nels you would like to put in to your

presets.

2. Continue using NAV DOWN to go

to the next successive preset and

NAV RIGHT to set the channel.

When you are finished, exit the

setup menu using the front panel

Input button. You do not have to fill

up all your presets. Any presets set

to none will be skipped.

Resetting channel skipping and channel locking:

The TGR-401 does not support

these features. However, should the tuner exhibit odd behavior regarding channel tuning, it may need to have the channel skipping and channel locking memories cleared. To do this, enter Setup menu using the MENU key on the remote. Navigate to SETUP/CONTROL and go down the menu to SIRIUS RESET. Press NAV RIGHT to force a reset.

User's Manual