Sunfire IV manual Speaker Position Menu

CHAPTER 4

Speaker Position Menu

	MAIN MENU
TRIMS
MODES
TONE
INPUTS	SETTINGS
SETTINGS

MAIN ZONE
ZONE 2		SPEAKERS
SPEAKERS
VIDEO
	SIZE
SOFTWARE
	POSITION
CONTROL
	CALIBRATION
	L-R CROSSOVER		110 HZ
	C-SURR CROSSOVER		90 H
	SUBWFR MODE

Speaker Position

This menu allows you to enter the
distance from your listening position
to the various speakers. The TGIV will
then automatically adjust and correct
the speaker delay times. The sound
from each speaker should arrive at
the listener at the correct time. The
distance measurement is not criti-
cal, and a visual estimate is usually
adequate.
The procedure is as follows:
1. Measure or visually estimate
(in feet and inches) how far
each speaker is away from the
center listening position of your
home theater.
2. In the OSD menu, use the
remote control joystick arrow
buttons to enter the distance
in feet and inches for each
	SPEAKER	DISTANCE
speaker.
3. The TGIV automatically sets	LEFT MAIN/SIDE
	RIGHT MAIN/SIDE
the appropriate delays for each
speaker so the sounds arrive	CENTER
at the listening position at the	LEFT SURROUND
correct time.
	RIGHT SURROUND
4. Use this table to record your	LEFT SURR BACK
speaker distance measure-
	RIGHT SURR BACK
ments.

SPEAKER POSITION

L MAIN/SIDE	4	ft 6in
R MAIN/SIDE	4	ft 6in
CENTER	3	ft 0in
L SURR	4	ft 0in
R SURR	4	ft 0in
L SURR BACK	5	ft 0in
R SURR BACK	5	ft 0in

39

User's Manual