Unpacking, Remote Features | Sunfire IV instruction

Sunfire IV manual Unpacking, Remote Features

CHAPTER 1

Unpacking

Your Theater Grand IV should reach you in perfect condition. If you do notice any shipping damage, please contact your Sunﬁ re Dealer immediately.

Gently lift out the unit and remove all the packing material and acces- sories. It is important to save all the packing materials and the box in case your Theater Grand IV ever needs to be moved or shipped for repair.

Make sure that you keep your sales receipt. It is the only way to establish the duration of your Limited Warranty and it may come in useful for insur- ance purposes.

Please take a moment to ﬁ ll out and mail the Sunﬁ re Customer Response card. Also read the serial number located on the rear panel, and record it here:

Serial #:

___________________________

Purchased at:

___________________________

Date: _______________________

Features

•Fully automatic signal-sens- ing for audio and video input selection

•Automatic video format transcoder upconverts video sources to S and component video

•Dolby Digital EX, Dolby Pro Logic IIx, DTS ES and DTS Neo:6 decoding modes

•DSP Holographic Imaging for unbelievable soundstage enhancement

•7.1 channel outputs plus ste- reo side outputs for a total of 9.1 channels

•Three component video inputs and two component video out- puts

•Party mode allows two channel playback through all speakers

•AM/FM tuner with 40 presets

•Flash memory upgradable through RS232 or CD

•Second zone can play sources independent of the main zone

•Six A/V inputs, each with audio, S-video and composite video

•Three A/V outputs, each with au- dio, S-video and composite video

•Three audio-only inputs, in- cluding MM Phono

•8 channel analog input with sepa- rate RCA connectors

•On screen display (OSD)

•Two Tape record outputs

•Six coaxial and four optical digital inputs

•Coaxial and optical digital out- puts (including from analog and downmixed 5.1 sources)

•IEEE 1394 (FireWire™) port for future expansion

•Treble and Bass tone controls

•RS-232 port with discrete codes

•Trigger outputs for both zones

•IR control of both zones, with rear IR ports and discrete codes.

•Supports all digital sampling rates to 96 kHz

•24-bit Crystal Semiconductor® Analog to Digital converter

•24-bit, 192 kHz Analog Devices® Digital to Analog converters

•32-bit, 20 MHz control micro- processor and 24-bit, 150 MIPS Motorola SymphonyTM DSP pro- cessor

•DSP “simulated” surround mode for two channel sources

•Gold plated inputs and outputs

•Can record a downmixed 2 channel output from a 5.1 digital source

•Direct 2-channel analog bypass mode

•Balanced XLR outputs and un- balanced RCA outputs

•Four subwoofer outputs

•IEC removable power cord

•Steel chassis with thick, milled aluminum faceplate

Remote Features

•Fully backlit

•Pre-programmed for most brands of A/V equipment

•Learns commands from your other remote controls

•Macro feature lets you program a sequence of control steps

•Operates up to ten components

•Does not lose programming memory when changing batteries

User's Manual