Sunfire IV manual Using the Tgiv, Bass Management, Video Conversion

Page 42

CHAPTER 5

Using the TGIV

Bass Management

Unlike higher frequencies, it is diffi cult to discern exactly from which direction lower bass is coming from.

The TGIV has a bass management system which takes advantage of this effect. It allows you to choose whether your speakers will play the full fre- quency range, or if the bass will be redirected to the subwoofer.

The advantages of redirecting the bass to a subwoofer are :

The overall bass of the system is improved as subwoofers, such as Sunfi re's powered True Subwoofers are specially designed for this frequency range.

The subwoofer can simulta- neously play the bass from all of the speakers, in addition to it’s own low frequency effects channel (LFE).

There is no loss in percep- tion of the position of movie or music sound effects, as the ear cannot easily locate the posi- tion of bass sound sources.

Smaller speakers can be used for front, center and sur- rounds, as they do not have to reproduce the low frequency range. This leads to a saving in speaker expense and room space. Note that a subwoofer is required if the front speakers are set to SMALL.

Your amplifi ers do not waste power reproducing the low frequency range.

See the previous page for informa- tion regarding the adjustment of the bass management crossover point.

The SPEAKER SIZE menu is used to set the bass management correctly for your speaker system. See page 38.

NOTE: Dolby Digital and DTS modes are designed especially for complete systems with front, cen- ter, and surround speakers and subwoofers. You need all of the speakers to get the best performance from your Home Theater. If you do not have a subwoofer connected, then you should not use the bass manage- ment system (so set all the speakers to Large). Without a subwoofer, you will be missing the 5.1 LFE (low fre- quency effects) information.

Considering the advantages of the bass management system, you might try setting all of your speakers to Small, even if they are capable of good low-frequency performance.

Video Conversion

The TGIV has advanced digital video DSP circuitry and coding which allows the following:

Up conversion from composite video inputs to S-video and component video outputs.

Up conversion from S-video inputs to component video outputs.

Down conversion from S-video inputs to the MON2 composite video output jack.

The video conversion makes the TGIV able to switch all of your video sources, making it the central con- troller for all of your audio and video entertainment.

For example, suppose you have

your TV connected to the component video outputs of the TGIV. Any of your other video sources can be connected to the TGIV, even those which do not have component video. The TGIV will convert any composite and S-video sources to component video.

Notes:

Do not connect both compos- ite and S-video inputs on the same TGIV input. Always con- nect the highest quality video source type.

The quality of the converted output is limited by the quality of the original source.

The Tuner, Tape and Phono in- puts do not have video inputs. When these are selected, the video stays on the last selected video source.

42

User's Manual

Image 42
Contents Theater Grand Safety Instructions NEC National Electrical Code Contents Introduction Features Remote FeaturesUnpacking Overview MainQuick Start Guide TgivExit Further Information Front Panel Features Level PowerTuner Presets Illuminated Logo PanelRear Panel Features FM Antenna RS-232 PortXLR Audio Outputs AM AntennaInstallation System Confi gurations Analog audio and composite videoDigital audio and component video connections RandLD connections external RF Demodulator and S-Video DigitalVCR connections analog audio and composite video GrandCD and Antenna connections AM Loop AntennaTurntable connections Tape Player connections Channel Input connections analog audio GrandAmplifi er connections Zone 2 connections Remote Control Main Audio Operating the Tgiv with the RemoteZone ENTRemote Setup PRORemote Setup LearnRecal Recall MacroOn Screen Display OSD OSD ActivationQuick Information OSD Menus Trim and Tone Menus Trims MenuTone Menu Modes Menu Modemusic Center Width Panorama on DimensionModes Menu Pro Logic IIx MenuInput Menus Input Confi guration MenusInput Menus Tuner Preset Menus Tuner Preset MenuPreset procedure Main Zone and Zone 2 Menu Zone 2 MenuMain Zone Menu Control Menu Video, Software and Control MenusSoftware Menu Video MenuSpeaker Size Menu Speaker Size MenuSpeaker Position Menu Speaker PositionSpeaker Calibration Menu Speaker CalibrationSpeakers Crossover adjustment Subwoofer ModeSpeaker Crossover Menu CrossoverUsing the Tgiv Bass ManagementVideo Conversion Surround Modes for 2-Channel Sources Dolby PRO Logic IIDTS Neo6 Surround Modes for Multi-Channel Sources DTSDTS ES Tuner Operation Recording Recording to a Tape PlayerRecording to a VCR Connections IndicatorsZone 2 Operation Turning on ZoneSoftware Upgrade Software Revision List Holographic ImageSoftware CD Front Speakers Speaker PlacementAppendix Center speakerSurround Back Speakers Side-Axis SpeakersSurround speakers Subwoofer LocationRS-232 Port Troubleshooting Guide Same AM station can be heard at different frequenciesNo Dolby Digital, DTS playback Your amplifiers shut down often Remote Control Codes Tape Decks TelevisionsVCRs Mode Settings Tone SettingsZone Settings Video SettingsSpecifi cations Limited Warranty Service AssistanceManual part number 913-107-00 Rev B