Revolabs sony PCS-G70 setup guide Connecting the Cables

Connecting the Cables

1.Connect a Female XLR – 1/8” audio cable between the XLR “CONF OUT” port on the Fusion and the “MIC 1” port on the PCS-G70.

2.Connect a Male RCA-RCA audio cable between the “CONF IN” port on the Fusion and the non-mixed “AUDIO OUT” port on the PCS-G70.

3.Connect a Male RCA audio cable between the “Room Out” port on the Fusion and the Amplified Speakers.

3

1

2

NOTE: You must use your Fusion remote control to control the room volume for both the audio and video conference calls. Adjusting the volume in the video codec will cause echo.