MTD ERV 365, ERV 350 manual Ventilation via Extractor Hood, Post-heater* in Duct System

Page 24

3

side air no longer has to be temporarily reduced (or even interrupted for a short time) in order to pre- vent condensation freezing in the heat exchanger. Instead the preheater is temporarily switched on. In addition, this option offers greater comfort as the supply air is preheated to more or less room temperature.

The preheater is switched on and off automati- cally. As soon as the temperature of the outside air is below 0 oC for a certain period, the air duct of the preheater is opened and the preheater is switched on to heat the intaken outside air to at least 1 oC. Here a temperature sensor in the sup- ply air duct of the MTD-ERV 350 measures the temperature. This preheating control ensures bal- anced ventilation up to a maximum of 150 m³/h at -15 oC. The user cannot inßuence the automatic preheater control. The installer has to modify the preheating control, for example during installa- tion of the MTD-ERV 350, in menu P52 via the CC Ease operating unit (for further information, see section 4.4).

The preheater and the corresponding temperature sensor must be connected to the PCB panel behind the front panel of the MTD-ERV 350 by the installer. In the event of retrofitting, installation in- structions are supplied with the installa- tion kit.

3.4.2. Ventilation via Extractor Hood*

An extractor hood can be connected to the MTD- ERV 350.

This allows moisture (steam) and food odours to be discharged as quickly as possible via the ventilation system. For this, the extractor hood must be connected to the PCB panel (extended version) of the MTD-ERV 350. The extractor hood can then be operated via the CC Ease operating unit of the MTD-ERV 350.

Switching the extractor hood on and off, see section 2.3.4.

As soon as the extractor hood is switched on using the CC Ease operating unit, the valve of the extractor hood opens and the MTD-ERV 350 switches to the 'Extractor hood' function. Ventila- tion positions 1, 2 or 3 can be set. These ventila- tion positions for the extractor hood correspond to the 'normal' ventilation positions. Please note, however, that these ventilation positions for the extractor hood are always slightly higher (by x%) than the 'normal' ventilation positions. The user can set this x% value himself in menu P29 on the

CCEase operating unit (see also section 2.3.7). The following increase values can be selected:

In addition to this ventilation via the extractor hood, a temperature sensor is also installed in the extractor hood. This temperature sensor measures the temperature of the air discharged via the extractor hood. Should this temperature become too high, i.e. more than 60 oC, the valve in the extractor hood will close to protect the MTD-ERV 350 and in particular the heat/moisture exchanger.

3.4.3 Post-heater* in Duct System

As an option, the ventilation system can also be equipped with a post-heater.

The post-heater is a heater element that is in- stalled in the duct system of the ventilation sys- tem, in other words downstream of the MTD-ERV

Menu P29:

Setting the rate of increase

ϖ

Rate of increase

Minimum

1%

 

 

 

 

ϖ

Rate of increase

Standard

10%

 

 

 

 

ϖ

Rate of increase

Maximum

99%

 

 

 

 

350. The post-heater ensures that after the outside air has first been heated in the heat/moisture ex- changer of the MTD- ERV 350, the sup- ply air is additionally heated before it en- ters the living rooms. The advantage of the

post-heater is that the supply air can be directly admitted to the living rooms at the comfort tem- perature set for the dwelling. That means addi- tional comfort.

The post-heater is not supplied as stand- ard with the MTD-ERV 350. It is actually part of the duct system of the ventilation system and does not belong to the scope of supply of the MTD-ERV 350.

The post-heater is switched on and off automati- cally. As soon as the temperature of the supply air drops below the set comfort temperature, the post-heater is switched on to heat up the supply air to the comfort temperature. A temperature sensor

in the duct system measures the temperature of the supply air immediately behind the post-heat- er. The user cannot influence the automatic post- heater control system. The post-heater reacts to

20 Function of the System

Page 23 Page 25
Image 24
Page 23 Page 25
Contents MTD-ERV 350 All rights reserved Table of Contents Checking the Scope of Supply CE Symbol Warranty and LiabilityWarranty will be voided if ForewordSafety Safety PrecautionsSafetyInstallationsandSafetyMeasures Symbols UsedDefinition of Terms Moisture Recovery Option Available Operating AidsCC Ease Operating Unit 2 3-position Switch Option Setting Date and Time Reading off the comfort temperatureBathroom Switch Option ReadingandSettingComfortTemperatureSetting the comfort temperature ReadingandSettingVentilationLevelSetting the ventilation level Reading off the ventilation levelSwitching Extractor Hood On and Off Option SwitchingSupplyandExhaustAirFansOn and OffSetting Ventilation Programme Weekday fan position Weekend fan positionAccess to the P menus Making settings in the P menusSetting Additional Functions via the P Menus Return to the main windowMenu P2 ! Set time delays Menu P1 ! Status of the functionsMenu P9 ! Status of the functions from menu P5 Use of the Switches Option Service by the UserSetting Ventilation Using 3-position Switches Setting Ventilation Using Bathroom SwitchesFor cleaning For replacementCleaning or Replacing Filters Cleaning Valves in the Home 2 3-positionSwitchwithMalfunctionLEDOn the position of the valves MalfunctionsEnd of Service Life What to Do in the Event of a Malfunction?Components of the Balanced Ventilation System Controlled Ventilation SystemMTD-ERV MTD-ERV 350 Methods of Operation Additional OptionsPreheater in MTD-ERV Ventilation via Extractor Hood Post-heater* in Duct System4 CO2 Sensor* in the Home RH Sensor* in the HomeUnderground Geothermal Heat Exchanger Technical Specifications Power supply Dimension Sketch Preconditions for Installation Installation of the MTD-ERVTransport and Unpacking Checking the Scope of SupplyWall Mounting Connection of the Air DuctsConnection of the Condensation Drain Commissioning the MTD-ERV MTD-ERV 350 RightSelect a value for the parameter with or Menu P4 ! Read off the temperatures % and ppm Menu P3 ! Set ventilation controlsMenu P5 ! Setting additional control functions Menu P6  Setting additional control functions Menu P7 ! Read off malfunctions and system informationMenu P8  Open-loop and closed-loop control ExplanationSetting the Air Specifications Maintenance by the InstallerInspection of Heat Exchanger and Fans MTD-ERV 350 L MTD-ERV 350 RFilter Cleaning, if Preheater is Fitted Malfunction Indications on the CC Ease Display Code DescriptionMalfunction indications on the CC Ease Display à Remedy Avoid contact with the PCBReset unit MIN MED T1 OK? A0 / A10 / A11 Malfunctions or Problems without Indications Problem/Malfunction Cause Check / measureSpare Parts Number PartWiring Diagram MTD-ERV 350 LEFT-HAND Standard Version Supply airWiring Diagram MTD-ERV 350 LEFT-HAND Luxury Version Supply airWiring Diagram MTD-ERV 350 RIGHT-HAND Standard Version Wiring Diagram MTD-ERV 350 RIGHT-HAND Luxury Version EC Declaration of Conformity EC Declaration of ConformityPage

ERV 350, ERV 365 specifications

The MTD ERV 365 and ERV 350 are advanced energy recovery ventilation (ERV) systems designed to enhance indoor air quality and energy efficiency in residential and commercial buildings. These units utilize cutting-edge technologies to transfer heat and moisture between incoming and outgoing air streams, optimizing the temperature and humidity levels of the conditioned air.

One of the main features of the MTD ERV 365 is its high energy recovery efficiency. Equipped with a specially designed heat exchanger, this ERV can reclaim a significant portion of the energy from the exhaust air, reducing the heating and cooling load on HVAC systems. This results in lower energy bills and decreased environmental impact. The ERV 350 offers similar benefits but is tailored for slightly smaller spaces, making it suitable for various residential applications.

Both models are constructed with durability in mind, featuring robust housing and weather-resistant materials that ensure long-lasting performance. The MTD ERV series is designed to withstand varying environmental conditions, ensuring reliable operation in challenging climates. Additionally, noise-reduction technology minimizes operational sounds, promoting a peaceful indoor environment.

User-friendly controls are another highlight of the MTD ERV systems. They come equipped with intuitive interfaces, allowing users to easily adjust settings, monitor performance, and receive maintenance notifications. Advanced sensors provide real-time data on indoor air quality parameters, ensuring optimal operation based on the specific needs of the environment.

Installation and maintenance are made straightforward with these ERV units. They feature a compact design that facilitates integration into existing HVAC systems or new constructions. Filters are easily accessible for routine cleaning or replacement, maintaining peak performance over time.

Furthermore, both the MTD ERV 365 and ERV 350 are designed with sustainability in mind. Using materials that are recyclable and energy-efficient components contributes to a reduced carbon footprint. These ERV systems also comply with various building codes and standards, ensuring they meet industry requirements for safety and efficiency.

In summary, the MTD ERV 365 and ERV 350 are sophisticated energy recovery ventilation solutions that combine advanced technologies and user-friendly features. With high energy recovery efficiency, durable construction, and easy integration, they stand out as models for improving indoor air quality and energy efficiency in a variety of settings.
Top Page Image Contents