MTD ERV 350, ERV 365 manual Foreword, CE Symbol, Warranty and Liability, Warranty will be voided if

Page 5

I

1 Introduction

This chapter contains general information on the MTD-ERV 350.

1.1Foreword

Apartfromthisgeneralchapter,thisoperatingman- ual consists of:

A section for the user,

A section with technical specifications, and …

A section for the installer.

Read this operating manual carefully be- fore putting the unit into operation.

-User Chapters 1 to 3.

-Installer Chapter 4.

This operating manual contains all the information required for safe and optimum installation, opera- tion and maintenance of the MTD-ERV 350. In ad- dition, it should serve you as a reference manual during service work so that this can be carried out safely and responsibly. The unit is subject to ongoing improvement and further development. Your MTD-ERV 350 may therefore differ slightly from the descriptions in this operating manual.

NOTE:

This manual has been produced with the greatest care and attention. However, no rights can be derived from this. Furthermore, the company reserves the right to change the contents of this operating manual at any time without prior notification.

1.2CE Symbol

TheunitismarketedunderthenameMTD-ERV 350. The MTD-ERV 350 is a balanced ventilation system with heat recovery for healthy, balanced and ener- gy-saving ventilation of living premises.

The year of construction of the MTD-ERV 350 is shown on the identification plate of the ComfoAir 350.

1.3Warranty and Liability

1.3.1 General

Our “General Terms and Conditions” in their latest wording apply to the MTD-ERV 350. The warranty period begins with commissioning, but not later than one month after delivery. This applies to ma- terial replacement and does not include labour. It applies only on proof of maintenance having been performed by a specialist company in accordance with our instructions.

1.3.2 Warranty Terms

The manufacturer's warranty on the MTD-ERV 350 is for a period of 24 months after installation, but up to a maximum of 30 months after the date of manu- factureofthe MTD-ERV 350.Warrantyclaimscanbe made only for material flaws and/or design errors discovered during the warranty period.In the event of a warranty claim, the MTD-ERV 350 must not be dismantled without the prior written authorisation of the manufacturer. The manufacturer's warranty covers spare parts only if these have been installed by an installer approved by the manufacturer.

The warranty will be voided if:

The warranty period has expired;

The unit is operated without filter;

Parts not supplied by the manufacturer are in- stalled;

Unauthorised changes or modifications are made to the unit.

1.3.3Liability

The MTD-ERV 350 has been developed and manu- factured for use in "balanced ventilation systems". Use in any other way does not constitute an 'intend- ed use' and can result in damage to the MTD-ERV 350 or in personal injury for which the manufacturer accepts no liability.

Themanufactureracceptsnoliabilityfordamageor injury resulting from the following causes:

Failure to observe the safety, operating and maintenance instructions contained in this op- erating manual.

Installation of spare part not supplied by the manufacturer.

The responsibility for the use of such spare parts lies solely with the installer.

Normal wear.

Introduction 1

Image 5
Contents MTD-ERV 350 All rights reserved Table of Contents Checking the Scope of Supply Warranty and Liability CE SymbolWarranty will be voided if ForewordSafety Precautions SafetySafetyInstallationsandSafetyMeasures Symbols UsedDefinition of Terms CC Ease Operating Unit Moisture Recovery OptionAvailable Operating Aids 2 3-position Switch Option Reading off the comfort temperature Setting Date and TimeBathroom Switch Option ReadingandSettingComfortTemperatureReadingandSettingVentilationLevel Setting the comfort temperatureSetting the ventilation level Reading off the ventilation levelSwitchingSupplyandExhaustAirFansOn and Off Switching Extractor Hood On and Off OptionWeekday fan position Weekend fan position Setting Ventilation ProgrammeMaking settings in the P menus Access to the P menusSetting Additional Functions via the P Menus Return to the main windowMenu P1 ! Status of the functions Menu P2 ! Set time delaysMenu P9 ! Status of the functions from menu P5 Service by the User Use of the Switches OptionSetting Ventilation Using 3-position Switches Setting Ventilation Using Bathroom SwitchesCleaning or Replacing Filters For cleaningFor replacement 2 3-positionSwitchwithMalfunctionLED Cleaning Valves in the HomeOn the position of the valves MalfunctionsWhat to Do in the Event of a Malfunction? End of Service LifeControlled Ventilation System Components of the Balanced Ventilation SystemMTD-ERV Preheater in MTD-ERV MTD-ERV 350 Methods of OperationAdditional Options Post-heater* in Duct System Ventilation via Extractor HoodRH Sensor* in the Home 4 CO2 Sensor* in the HomeUnderground Geothermal Heat Exchanger Technical Specifications Power supply Dimension Sketch Installation of the MTD-ERV Preconditions for InstallationTransport and Unpacking Checking the Scope of SupplyConnection of the Condensation Drain Wall MountingConnection of the Air Ducts MTD-ERV 350 Right Commissioning the MTD-ERVSelect a value for the parameter with or Menu P3 ! Set ventilation controls Menu P4 ! Read off the temperatures % and ppmMenu P5 ! Setting additional control functions Menu P7 ! Read off malfunctions and system information Menu P6  Setting additional control functionsExplanation Menu P8  Open-loop and closed-loop controlInspection of Heat Exchanger and Fans Setting the Air SpecificationsMaintenance by the Installer MTD-ERV 350 R MTD-ERV 350 LFilter Cleaning, if Preheater is Fitted Code Description Malfunction Indications on the CC Ease DisplayAvoid contact with the PCB Malfunction indications on the CC Ease Display à RemedyReset unit MIN MED T1 OK? A0 / A10 / A11 Problem/Malfunction Cause Check / measure Malfunctions or Problems without IndicationsNumber Part Spare PartsSupply air Wiring Diagram MTD-ERV 350 LEFT-HAND Standard VersionSupply air Wiring Diagram MTD-ERV 350 LEFT-HAND Luxury VersionWiring Diagram MTD-ERV 350 RIGHT-HAND Standard Version Wiring Diagram MTD-ERV 350 RIGHT-HAND Luxury Version EC Declaration of Conformity EC Declaration of ConformityPage

ERV 350, ERV 365 specifications

The MTD ERV 365 and ERV 350 are advanced energy recovery ventilation (ERV) systems designed to enhance indoor air quality and energy efficiency in residential and commercial buildings. These units utilize cutting-edge technologies to transfer heat and moisture between incoming and outgoing air streams, optimizing the temperature and humidity levels of the conditioned air.

One of the main features of the MTD ERV 365 is its high energy recovery efficiency. Equipped with a specially designed heat exchanger, this ERV can reclaim a significant portion of the energy from the exhaust air, reducing the heating and cooling load on HVAC systems. This results in lower energy bills and decreased environmental impact. The ERV 350 offers similar benefits but is tailored for slightly smaller spaces, making it suitable for various residential applications.

Both models are constructed with durability in mind, featuring robust housing and weather-resistant materials that ensure long-lasting performance. The MTD ERV series is designed to withstand varying environmental conditions, ensuring reliable operation in challenging climates. Additionally, noise-reduction technology minimizes operational sounds, promoting a peaceful indoor environment.

User-friendly controls are another highlight of the MTD ERV systems. They come equipped with intuitive interfaces, allowing users to easily adjust settings, monitor performance, and receive maintenance notifications. Advanced sensors provide real-time data on indoor air quality parameters, ensuring optimal operation based on the specific needs of the environment.

Installation and maintenance are made straightforward with these ERV units. They feature a compact design that facilitates integration into existing HVAC systems or new constructions. Filters are easily accessible for routine cleaning or replacement, maintaining peak performance over time.

Furthermore, both the MTD ERV 365 and ERV 350 are designed with sustainability in mind. Using materials that are recyclable and energy-efficient components contributes to a reduced carbon footprint. These ERV systems also comply with various building codes and standards, ensuring they meet industry requirements for safety and efficiency.

In summary, the MTD ERV 365 and ERV 350 are sophisticated energy recovery ventilation solutions that combine advanced technologies and user-friendly features. With high energy recovery efficiency, durable construction, and easy integration, they stand out as models for improving indoor air quality and energy efficiency in a variety of settings.