Pitco Frialator VF35 operation manual Ventilation And Fire Safety Systems, Gas Line Requirements

Page 8

Ventilation And Fire Safety Systems

Your new appliance must have proper ventilation to function safely and properly. Exhaust gas temperatures can reach as high as 1100 °F (593 °C). Therefore, it is very important to install a fire safety system. Your ventilation system should be designed to allow for easy cleaning. Frequent cleaning and proper maintenance of the ventilation system and the appliance will reduce the chances of fire. Ventilation and fire safety systems must comply to local and national codes for US and Canada. Refer to ANSI 83.11 for a list of reference documents that will provide guidance on ventilation and fire safety systems. For installations in U.S. and Canada, additional information can be obtained from CSA International, 8501 East Pleasant Valley Road, Cleveland, OH, 44131 or visit their website at www.csa- international.org. In Australia the ventilation system must comply with AS/NZS 5601.0.

It is essential that the appliance be operated only when adequate ventilation is provided. Your ventilation hood should be properly maintained. A qualified installation professional should ensure that the hood is operating properly in conjunction with the appliance. Inadequate ventilation may not properly evacuate appliance all emissions. Excessive or unbalanced ventilation may cause drafts, which could interfere with proper operation of the pilot and burners. Leave at least 18 inches (47cm) of open space between the flue of the appliance and the intake of the exhaust hood.

WARNING

Ensure that your ventilation system does not cause a down draft at the appliance’s flue opening. A down draft will not allow the appliance to exhaust properly and will cause overheating, which may cause permanent damage. Damage caused by down drafts will not be covered by the warranty. NEVER allow anything to obstruct the flow of combustibles or ventilation exiting the appliance. NEVER place anything on top of the flue area, or block the flue in any way. Never place a grease condensing drip pan over the flue opening.

WARNING

NEVER connect the ventilation blower or hood directly to the flue of this appliance. The resulting increased flow of air through the combustion system will cause improper operation, poor temperature recovery, poor ignition and could extinguish the pilot.

WARNING

Replacing or adding appliances under a pre-existing fire safety system may require modifications to the system. ALWAYS contact a professional who is qualified in installing, designing and maintaining your fire safety system to assure that any appliances located under the fire safety system are adequately protected.

If installed in Australia the fryer must be installed in accordance with AS/NZS 5601, local authority and any other relevant statutory regulations. Flexible hose (if used) must comply with AS/NZS 1869 Class B or D, be of appropriate internal diameter, be kept as short as possible (not exceed 1.2 meters), must not be kinked and not be in contact with a hot surface. A chain must be fitted to restrict the fryer movement to no more than 80% of the hose length.

NOTICE

NEVER connect the blower directly to the flue openings. The direct flow of air will cause poor temperature recovery,

poor ignition, inefficient operation of the fryer, and could extinguish the pilot.

Gas Line Requirements

A properly installed gas supply system will deliver 7.0 ± 2.0" w.c. natural gas (12.0 ± 2.0" w.c. LP) to all appliances connected to the line, operating at full demand.

NOTICE

Do NOT exceed 13.5” W.C. pressure as damage may occur to the gas valve

8

L20-418 Rev 0 9/13

Image 8
Contents No OPTION/STAND Alone To the PURCHASER, Owner and Store Manager Standard Accessories Table of Contents Installation Clearances Checking And Unpacking Your New ApplianceLeveling The Fryer Legs/Casters Caster and leg typesFuel Supply Line Leak and Pressure Testing Gas ConnectionFuel Types Quick Disconnect Gas ConnectionVentilation And Fire Safety Systems Gas Line RequirementsLighting Instructions Initial CleaningDaily Cleaning Weekly Fryer Cleaning Thermostat Calibration CheckThermostat Calibration Filling The Fryer With Liquid ShorteningFilling The Fryer With Solid Shortening Fryer Shut-DownL20-418 Rev 0 9/13
Related manuals
Manual 16 pages 11.4 Kb

VF35 specifications

The Pitco Frialator VF35 stands as an exemplary model in the world of commercial frying equipment, known for its efficiency, reliability, and technology-driven features that cater to the demands of modern kitchens. Designed for high-volume frying, the VF35 is the go-to choice for restaurants, cafeterias, and catering operations looking for quality and performance.

One of the most notable features of the VF35 is its fry tank capacity, accommodating up to 35 pounds of oil, allowing for large batches of food to be cooked simultaneously. The unit is designed with a robust stainless-steel construction, ensuring durability and resistance to corrosion while maintaining an aesthetically pleasing appearance. This not only enhances the fryer’s longevity but also makes it easy to clean, a critical factor in fast-paced kitchen environments.

Equipped with advanced control systems, the Pitco Frialator VF35 offers precise temperature management, which is essential for achieving perfect frying results. The powerful temperature control mechanisms provide rapid recovery time, maintaining optimal oil temperature even when large quantities of food are added. This feature not only enhances food quality but also boosts overall productivity in the kitchen.

The VF35 incorporates a state-of-the-art oil filtration system that improves the quality of the oil and extends its life, reducing operational costs associated with frequent oil changes. This built-in filtration system can be automated, allowing operators to focus on other kitchen tasks while ensuring the oil remains clean for consistent frying results.

Safety is another critical aspect of the VF35 design. It includes several built-in safety features such as a cool-touch handle for the fry baskets, as well as an emergency shut-off switch, helping to prevent accidents and ensuring operator safety during use. Additionally, the fryer is designed for easy maintenance, allowing quick access to components for servicing, making it a convenient choice for busy establishments.

The Pitco Frialator VF35 not only meets the demands of high volume frying but does so with a focus on efficiency and ease of use. Its combination of durable construction, clever design, cutting-edge technology, and safety features makes it an indispensable asset in any commercial kitchen aiming to deliver exceptional fried foods, all while keeping the operation running smoothly and economically. Whether it’s golden-brown French fries, crispy chicken, or a variety of other fried delicacies, the VF35 is equipped to handle it all with flair and efficiency.