Kobe Range Hoods CH0142SQB, CH0130SQB, CH0136SQB, CH0148SQB Maintenance, Cleaning Hood Surface

Page 17

MAINTENANCE

SAFETY WARNING

NEVER PUT YOUR HAND INTO AREA HOUSING THE FAN WHILE THE FAN IS OPERATING.

For optimal operation, clean range hood surface and stainless steel baffle filters regularly.

Cleaning Hood Surface

CAUTION: NEVER USE ABRASIVE CLEANERS, PADS, OR CLOTHS.

Regular care will help preserve the appearance of the hood.

1)Use only mild soap or detergent solutions. Dry surfaces using soft cloth.

2)If hood looks splotchy (stainless steel hood), use an orange base cleaner to clean the surface of the hood. Avoid getting cleaner on the control switches. Spread a light coating over the surface of the hood and leave on for a few minutes. CAUTION: Do not leave on too long as this may cause damage to hood finish. Use soft towel to wipe off the cleaning solution, gently rub away stubborn spots. Use a slightly damp towel to get rid of any cleaning solution. Use dry soft towel to dry the hood.

3)To bring glow back into a stainless steel finish, use a stainless steel cleaner.

4)DO NOT allow deposits to remain for extended periods.

5)DO NOT use ordinary steel wool or steel brushes. Small bits of steel adhering to the surface may cause rust.

6)DO NOT allow salt solutions, disinfectants, bleaches, or cleaning compounds to remain in contact with stainless steel for extended periods. Many of these compounds contain chemicals, which may be harmful. Rinse with water after exposure and wipe dry with a clean cloth.

14

Image 17
Contents CH0136SQB CH0142SQB CH0148SQB Kobe Brand Range HoodPage Read and Save These Instructions ContentsRange TOP Grease Fire Page Must keep all material for returns or refunds Components of PackageCalculation before Installation InstallationFor Under the Cabinet For Stand Alone with Optional Duct CoverInstallation Table of Contents Preparation Before Installation Under the Cabinet InstallationF E T Y W a R N I N G Page Hood Preparation Before Installation Stand Alone InstallationBefore Releasing Duct Cover Installation Operating Instructions Speed Control Cleaning Hood Surface MaintenanceCleaning Stainless Oil Tunnel, Baffle Filters and Spacers Specifications Measurements & Diagrams For Under the Cabinet Page For Stand Alone with Optional Duct Cover Baffle Filter & Stainless Steel Spacers Description MODEL/SIZE Parts ListOptional Duct Cover Sold Separately Description Model / Size Blower AssemblyElectrical Assembly Switch Assembly Circuit Diagram Model NO. CH0130SQB CH0136SQB Model NO. CH0142SQB CH0148SQB Claims will not be Accepted After the Allocated Days Conditions Warranty Warranty CertificateTWO-YEAR Warranty Service Period Implied WARRANTIES/STATE LAW ServiceConsequential Damage Record the Following Information for Your Record Product RegistrationRegister Your Product 060726