Kobe Range Hoods CH0130SQB, CH0142SQB Claims will not be Accepted After the Allocated Days

Page 32

DISCLAIMER

1.CAREFULLY INSPECT ALL ITEMS FOR DAMAGES BEFORE ACCEPTING DELIVERY. NOTE ANY DAMAGES ON THE FREIGHT BILL OR EXPRESS RECEIPT. REQUEST NAME AND SIGNATURE OF THE CARRIER’S AGENT AND KEEP COPY TO SUPPORT YOUR CLAIM.

Upon acceptance of items, owner assumes responsibility for its safe arrival. Damages should be reported to carrier and a claim filed. Failure to do this could result in the carrier refusing to honor your claim. The carrier will furnish you with necessary forms for filing a claim.

DAMAGES CAUSED DURING TRANSIT ARE NOT COVERED UNDER OUR WARRANTY.

2.PLEASE INSPECT CONTENTS OF PACKAGE (S) CAREFULLY UPON RECEIVING! We must be notified in writing of any damages and/or missing parts within the allocated days upon receipt of package(s). Contact your local KOBE dealer or distributor or call KOBE for the time limit.

CLAIMS WILL NOT BE ACCEPTED AFTER THE ALLOCATED DAYS.

NOTE: ITEMS WERE THOROUGHLY TESTED AND CAREFULLY PACKED IN OUR FACTORY.

3.Products must be returned in good working condition with ALL original parts and documentation packed in ALL original cartons, fillers and shipping cartons. A restocking fee of 25% will be charged for all approved return(s).

EXCHANGES OR RETURNS MAY NOT BE ACCEPTED IF ANY PACKAGING IS MISSING.

4.MAKE SURE TO INSPECT THE HOOD FOR DAMAGES AND DEFECTS BEFORE INSTALLATION. Appearance flaws of the hood found after installation and not affecting hood performance is not covered under our warranty for returns or exchanges. Service visits not covered under warranty will carry a service charge.

A)Before Installation: Return for exchange or refund (please see above for acceptable returns).

B)After Installation: NO exchange or refund.

29

Image 32
Contents Kobe Brand Range Hood CH0136SQB CH0142SQB CH0148SQBPage Contents Read and Save These InstructionsRange TOP Grease Fire Page Components of Package Must keep all material for returns or refundsInstallation Calculation before InstallationFor Under the Cabinet For Stand Alone with Optional Duct CoverInstallation Table of Contents Under the Cabinet Installation Preparation Before InstallationF E T Y W a R N I N G Page Stand Alone Installation Hood Preparation Before InstallationBefore Releasing Duct Cover Installation Operating Instructions Speed Control Maintenance Cleaning Hood SurfaceCleaning Stainless Oil Tunnel, Baffle Filters and Spacers Specifications Measurements & Diagrams For Under the Cabinet Page For Stand Alone with Optional Duct Cover Baffle Filter & Stainless Steel Spacers Parts List Description MODEL/SIZEOptional Duct Cover Sold Separately Blower Assembly Description Model / SizeElectrical Assembly Switch Assembly Circuit Diagram Model NO. CH0130SQB CH0136SQB Model NO. CH0142SQB CH0148SQB Claims will not be Accepted After the Allocated Days Conditions Warranty Warranty CertificateTWO-YEAR Warranty Service Period Implied WARRANTIES/STATE LAW ServiceConsequential Damage Record the Following Information for Your Record Product RegistrationRegister Your Product 060726