T+A Elektroakustik K1 AV user manual Basic disc player settings Setup, Closing the Setup menu

Basic disc player settings (SETUP)

Player Setup Menu

The disc player in the K1 AV must be set up to match the characteristics of your TV set and your preferred methods of use. The settings required for this are grouped together in a ‘Player Setup Menu’, which is displayed on your television screen. In most cases you will only need to adjust the settings contained in the Player Setup Menu once, i.e. when the machine is initially set up and installed. You may need to refer to the operating instructions supplied with your TV set in order to establish the correct setup values, so please have the manual to hand before you start this process.

The Player Setup Menu is divided into the following sub- menus:

•GENERAL SETUP MENU

This is where you set general device settings such as screen size, display brightness etc.

•AUDIO SETUP MENU

In this sub-menu you set the audio characteristics, such as the sound mode and format of the digital output.

•VIDEO SETUP

At this point you can set the picture settings of the K1 AV such as the screen format (normal 4:3 / wide- screen 16:9), video norm and colour / contrast.

•PREFERRED SETTINGS (stopped disc only)

Here you can set your favoured personal settings, such as the preferred language for sound reproduction and sub-menus, child-protection measures etc.

The ”Preferred Settings” sub-menu can only be called up while the disc is stopped.

An overview of the Player Setup Menu is shown in the menu summary on the next page. The adjustment facilities of the individual menus are explained in detail in the following sections.

Operating the SETUP menu

Ensure that the disc player is selected as the listening source, that your TV set is switched on, and that it is switched to the K1 AV’s picture input (AV input).

The Player Setup Menu is opened with a long press on the blue  button on the remote control handset; please hold this button pressed in until the Player Setup Menu appears on your screen. The integral screen on the

K1 AV shows 'SETUP' while the menu is open.

You can now navigate within this menu using the cursor buttons, and enter the appropriate settings. When you have made a particular selection, press the  button to confirm your choice; the setting is then accepted and stored.

When you open the menu you will initially be at the top line of the screen menu. At this point you can select the sub-menu you wish to use (GENERAL / AUDIO / VIDEO / PREFERRED SETTINGS) using the Ø/ ×buttons.

Press the ×button to open the appropriate sub-menu. You can now find your way to a particular menu point using the Ø/ ×buttons.

If you wish to change the setting of any particular menu point, press the Öbutton and select the desired setting using the Ø/ × buttons. Press the  button to confirm your selection, and the setting is then accepted.

In each case pressing the Õbutton takes you back to the next higher menu level.

Closing the SETUP menu

To leave the SETUP menu press the Õ button - repeatedly if required - until you return to the topmost line of the menu. Now select the ‘End SETUP menu’ option, and confirm by pressing the button.

24