T+A Elektroakustik K1 AV user manual Tuner, Disc player

Page 54

Tuner:

Problem: The RDS station name does not appear on the integral screen.

Cause 1: The station is not broadcasting RDS information, or the station is not correctly tuned.

Remedy: Tune in the station so that the tuning indicator is central.

Cause 2: Interference is affecting the station, or the field strength is too low.

Remedy: Select stations which can be picked up without background hiss and interference.

Problem:

After a house move the integral screen

 

still displays the old program names - but

 

the stations can no longer be picked up.

Cause:

Programs with station names and reception

 

frequencies are still stored in the K1 AV, but

 

they can no longer be received in the new

 

locality.

Remedy 1: Clear the programs which cannot be received individually (see ‘Special tuner functions, 'Erasing presets').

Remedy 2: Erase all stored programs:

•Switch the machine on, then hold the button pressed in until a running script appears on the screen.

•When the running script stops, immediately hold the button on the remote control handset pressed in for about two seconds. The integral screen now displays the message:

'Pres-CLR'

All the stored programs have now been erased.

Problem:

The K1 AV is working normally, but very

 

few stations, or even none at all, can be

 

picked up.

Cause:

The aerial system or aerial cable is

 

defective.

Remedy:

Check that the aerial cable is making good

 

contact in the aerial socket and on the

 

K1 AV itself.

 

Check the aerial cable for damage, and

 

ensure that there are no kinks in it. If you

 

are not sure, fit a new aerial cable.

 

 

Problem:

When switching presets the RDS station

 

name does not appear correctly, or only

 

appears after a long delay.

Cause:

The name was not correctly received when

 

the preset was stored, or the transmitting

 

station broadcasts the station name as a

 

running script, which is non-standard.

Remedy:

Call up the preset, wait until the station

 

name appears correctly on the screen, then

 

store it manually.

Disc player:

Problem:

The disc is not recognized correctly, or

 

the screen displays the message ‘No

 

Disc’.

 

Cause 1:

Disc not correctly inserted.

 

 

Remedy:

Insert disc centrally, printed face up.

 

 

 

Cause 2:

Disc dirty.

 

 

 

Remedy:

Clean the disc and try again.

Cause 3:

Disc damaged in Table of Contents area

 

(TOC).

 

Remedy:

No remedy: the disc is unusable.

Cause 4:

The

machine

has cooled down severely

 

(e.g.

after

being transported), and

 

condensation has formed on the laser pick-

 

up optics.

 

Remedy:

Leave the unit in a warm, well ventilated

 

place for about an hour to warm up.

Problem:

Disc stops playing or ‘skips’.

Cause:

Disc is dirty or damaged.

 

 

Remedy:

Clean the disc and try again.

54

Page 53 Page 55
Image 54
Page 53 Page 55
Contents USERK1MANUALAV Page K1 AV WelcomeElektroakustik Following warning labels are attached to the machineSymbols used in these instructions About these instructionsContents Front panel controls  HeadphonesDisc mode only  Disc drawer   ScreenRemote control of the K1 AV Disc mode Tuner mode / /  Amplifier Switching onVolume Basic functionsMulti-room mode Amplifier menuAmplifier menu Bass NormExplanation OperationAmplifier menu point Sub-woofer volume Swlev Bass NormTuner Basic operationSwitching the Timer off Alarm TimerProgramming the Timer Special Tuner functionsReception mode Display TunermenüTuner menu point Reception modes Rcvm P28 104,90 MHz Tuner menu point Automatic storing Autostore Disc player Inserting and playing a discDuring playback Special functions Switching to Cursor controlSwitch Cursor control off Manual Cursor controlPlaying MP3 / Jpeg / Picture CDs Jpeg / Picture CD Requirements regarding MP3 discs Compatible formatsCompatibility with recordable media Audio formatsBasic disc player settings Setup Closing the Setup menuPlayer Setup MenuGeneral Setup Menu Analogue Output Audio-Setup MenuNight Mode CD UpsamplingDigital Output Digital AUDIO-SETUPSound Mode Lpcm outputVideo Setup TV TypeTV Display Component Picture SettingProgressive  Important noteBasic settings Page Safety notes Trouble-shooting Glossary Specification Amplifier Setup Menu Basic settings menu Amplifier Setup Menu Main Sat Vol a/b = darkest stage Time RDS 10-25 CLKAUX MIN Page Sockets  A TV Setting up the K1 AV B  RC in E2000Mains cables, mains filters WiringLoudspeaker cables, signal leads Care of the unitReplacing the batteries F6 Remote Control HandsetSwitching the remote control address  Disposal of exhausted batteriesWiring diagram Safety Notes Approved usage Device approval and conformity with EU directivesBass management Amplifier Setup MenuAttenuator = aerial signal reducer Cable networkDisc menu, DVD menu Loudspeaker configurationPreset = station memory Field strengthSearch threshold Stand-by modeUpdate Source device, listening sourceNo sound K1 AV does not switch on screenbutton do not light up No sound from the centre loudspeakerTo the signals from the F6 remote Control commandsRespond to control commands Responds to remote control signals fromTuner Disc playerPage Amplifier section CD/DVD player Accessoriesaccessories Special functionsHerford Deutschland * Germany

K1 AV specifications

T+A Elektroakustik, a prominent German manufacturer renowned for its high-fidelity audio equipment and innovative technologies, has made significant strides in the audio world with its K1 AV model. This all-in-one stereo receiver is a perfect blend of advanced technology and exemplary craftsmanship, making it a standout choice for discerning audiophiles seeking performance and versatility in one compact unit.

The K1 AV is designed to deliver remarkable audio quality, benefitting from T+A's rich experience in engineering and sound reproduction. This device serves as a multi-functional hub, supporting multiple audio formats and connectivity options to meet the diverse needs of modern consumers. One of its standout features is the high-resolution audio support, capable of playing back lossless formats, allowing listeners to experience their music with stunning clarity and detail.

At the heart of the K1 AV lies the use of high-quality components, including a state-of-the-art DAC (digital-to-analog converter), which ensures optimal sound reproduction across a wide frequency range. The amplification section is designed to preserve the integrity of the audio signal while providing ample power to drive various speakers. This attention to detail guarantees a engaging listening experience, whether you are watching movies, enjoying your favorite music, or gaming.

In terms of connectivity, the K1 AV is equipped with an array of inputs and outputs, including Bluetooth, USB, optical, and coaxial connections, making it compatible with a diverse range of sources. The inclusion of HDMI ARC allows for seamless integration with televisions and other devices, enhancing the overall audio experience in home theater setups.

Another remarkable aspect of the K1 AV is its user-friendly interface, with intuitively designed controls and a vibrant display that simplifies operation. T+A's commitment to quality is also evident in the build design, featuring a robust chassis that minimizes vibrations and interference, further enhancing audio performance.

Moreover, the K1 AV supports various streaming services, allowing users to enjoy their favorite music from platforms such as Spotify and Tidal effortlessly. The device’s modern design and premium aesthetics will seamlessly blend into any living space, making it a striking addition to home decor.

In summary, the T+A Elektroakustik K1 AV is a finely engineered audio powerhouse, catering to both music enthusiasts and casual listeners alike. With its exceptional sound quality, versatile connectivity options, and elegant design, the K1 AV stands out as a premier choice for those looking to elevate their audio experience. Whether you’re transforming your home theater or refining your music setup, the K1 AV promises to deliver immersive soundscapes that bring your entertainment to life.
Top Page Image Contents