T+A Elektroakustik K1 AV does not switch on screen, button do not light up, No sound

Page 52

Trouble-shooting

Many problems have a simple cause and a correspondingly simple solution. The following chapter describes a few difficulties you may encounter, and the measures you need to take to cure them.

If you find it impossible to solve a problem with the help of these notes please disconnect the unit from the mains and ask your authorised specialist dealer for advice.

Problem:

K1 AV does not switch on (screen and

 

button do not light up)

 

 

Cause:

Mains cable not plugged in correctly.

 

 

Remedy:

Check connections, push plugs in firmly.

 

 

 

 

Problem:

No sound

 

The MONITOR LED on the screen is

 

glowing.

Cause:

The K1 AV is set to MONITOR mode (tape

 

monitor).

Remedy:

Switch off the MONITOR function by

 

pressing the button on the front

 

panel.

 

 

Problem:

No sound

Cause 1:

Loudspeaker output is switched off.

 

 

Remedy:

Press the button on the remote control

 

handset to switch the loudspeaker output on.

Cause 2:

No source device, or incorrect source

 

device selected.

Remedy:

Select the correct source device.

Cause 3:

The volume is set at too low a level.

Remedy:

Increase the volume setting.

 

 

 

 

Problem:

No sound from the centre loudspeaker

Cause 1:

Centre speaker not activated in the

 

‘Amplifier Setup Menu’.

Remedy:

In the Amplifier Setup Menu switch on the

 

Centre speaker (see chapter 'Amplifier

 

Setup Menu - Centre loudspeaker'.

Cause 2:

The STEREO operating mode is selected.

 

 

Remedy:

Press the green button on the

 

remote control handset to switch to one of

 

the modes 3CH MUSIC or 3CH MOVIE.

 

 

Problem:

It is not possible to select the modes

 

3CH MUSIC and 3CH MOVIE.

Cause:

The centre loudspeaker is not activated in

 

the Amplifier Setup Menu.

Remedy:

Switch on the Centre speaker in the

 

Amplifier Setup Menu (see chapter

 

'Amplifier Setup Menu - Centre

 

loudspeaker').

Problem:

Poor sound quality, inadequate bass

Cause:

No sub-wooferconnected, but it is not

 

switched off in the ‘Amplifier Setup Menu’.

Remedy:

Disable

the sub-woofer in the

‘Amplifier

 

Setup Menu’

 

 

 

(see the chapter 'Amplifier Setup Menu -

 

sub-woofer cut-off frequency').

 

 

 

 

 

Problem:

Poor

sound

quality,

distorted

 

reproduction

 

 

Cause:

Very

small loudspeakers

(especially

 

satellite speakers) are easily overloaded by

 

loud low-frequency sound effects.

Remedy:

It is really essential to use an active sub-

 

woofer in conjunction with SAT speakers.

 

If you are using SAT speakers, select the

 

SAT setting for these loudspeakers and

 

select a high sub-woofer cut-off frequency

 

(HIGH).

 

 

 

(see the following points in the chapter 'Amplifier Setup Menu':

Main loudspeakers

Centre loudspeaker

Sub-woofer cut-off frequency)

Problem:

Centre-stage sound

events are

not

 

reproduced, or are reproduced too

 

quietly.

 

 

Cause 1:

No centre speaker connected, but the

 

Centre is not switched off in the ‘Amplifier

 

Setup Menu’.

 

 

Remedy:

Switch off the Centre in the Amplifier Setup

 

Menu

 

 

 

(see chapter 'Amplifier Setup Menu -

 

Centre loudspeaker').

 

 

Cause:2:

A centre speaker is

connected to

the

 

system, but the Centre is not activated in

 

the Amplifier Setup Menu.

 

Remedy:

Switch the Centre on in the Amplifier Setup

 

Menu

 

 

 

(see chapter 'Amplifier Setup Menu -

 

Centre loudspeaker').

 

 

52

Image 52
Contents USERK1MANUALAV Page Welcome ElektroakustikK1 AV Following warning labels are attached to the machineSymbols used in these instructions About these instructionsContents  Headphones Disc mode onlyFront panel controls  Disc drawer   ScreenRemote control of the K1 AV /  Disc mode Tuner mode/  Switching on VolumeAmplifier Basic functionsMulti-room mode Amplifier menuAmplifier menu Bass NormExplanation OperationAmplifier menu point Sub-woofer volume Swlev Bass NormTuner Basic operationAlarm Timer Programming the TimerSwitching the Timer off Special Tuner functionsTunermenü Reception mode DisplayTuner menu point Reception modes Rcvm P28 104,90 MHz Tuner menu point Automatic storing Autostore Inserting and playing a disc Disc playerDuring playback Switching to Cursor control Switch Cursor control offSpecial functions Manual Cursor controlPlaying MP3 / Jpeg / Picture CDs Jpeg / Picture CDCompatible formats Compatibility with recordable media Requirements regarding MP3 discs Audio formatsBasic disc player settings Setup Closing the Setup menuPlayer Setup MenuGeneral Setup Menu Audio-Setup Menu Night ModeAnalogue Output CD UpsamplingDigital AUDIO-SETUP Sound ModeDigital Output Lpcm outputTV Type Video SetupTV Display Picture Setting ProgressiveComponent  Important noteBasic settings Page Safety notes Trouble-shooting Glossary Specification Amplifier Setup Menu Basic settings menu Amplifier Setup Menu Main Sat Vol a/b = darkest stage Time RDS 10-25 CLKAUX MIN Page Sockets  ASetting up the K1 AV  B TV  RC in E2000Wiring Loudspeaker cables, signal leadsMains cables, mains filters Care of the unitF6 Remote Control Handset Switching the remote control addressReplacing the batteries  Disposal of exhausted batteriesWiring diagram Safety Notes Approved usage Device approval and conformity with EU directivesAmplifier Setup Menu Attenuator = aerial signal reducerBass management Cable networkLoudspeaker configuration Preset = station memoryDisc menu, DVD menu Field strengthStand-by mode UpdateSearch threshold Source device, listening sourceK1 AV does not switch on screen button do not light upNo sound No sound from the centre loudspeakerControl commands Respond to control commandsTo the signals from the F6 remote Responds to remote control signals fromTuner Disc playerPage Amplifier section Accessories accessoriesCD/DVD player Special functionsHerford Deutschland * Germany

K1 AV specifications

T+A Elektroakustik, a prominent German manufacturer renowned for its high-fidelity audio equipment and innovative technologies, has made significant strides in the audio world with its K1 AV model. This all-in-one stereo receiver is a perfect blend of advanced technology and exemplary craftsmanship, making it a standout choice for discerning audiophiles seeking performance and versatility in one compact unit.

The K1 AV is designed to deliver remarkable audio quality, benefitting from T+A's rich experience in engineering and sound reproduction. This device serves as a multi-functional hub, supporting multiple audio formats and connectivity options to meet the diverse needs of modern consumers. One of its standout features is the high-resolution audio support, capable of playing back lossless formats, allowing listeners to experience their music with stunning clarity and detail.

At the heart of the K1 AV lies the use of high-quality components, including a state-of-the-art DAC (digital-to-analog converter), which ensures optimal sound reproduction across a wide frequency range. The amplification section is designed to preserve the integrity of the audio signal while providing ample power to drive various speakers. This attention to detail guarantees a engaging listening experience, whether you are watching movies, enjoying your favorite music, or gaming.

In terms of connectivity, the K1 AV is equipped with an array of inputs and outputs, including Bluetooth, USB, optical, and coaxial connections, making it compatible with a diverse range of sources. The inclusion of HDMI ARC allows for seamless integration with televisions and other devices, enhancing the overall audio experience in home theater setups.

Another remarkable aspect of the K1 AV is its user-friendly interface, with intuitively designed controls and a vibrant display that simplifies operation. T+A's commitment to quality is also evident in the build design, featuring a robust chassis that minimizes vibrations and interference, further enhancing audio performance.

Moreover, the K1 AV supports various streaming services, allowing users to enjoy their favorite music from platforms such as Spotify and Tidal effortlessly. The device’s modern design and premium aesthetics will seamlessly blend into any living space, making it a striking addition to home decor.

In summary, the T+A Elektroakustik K1 AV is a finely engineered audio powerhouse, catering to both music enthusiasts and casual listeners alike. With its exceptional sound quality, versatile connectivity options, and elegant design, the K1 AV stands out as a premier choice for those looking to elevate their audio experience. Whether you’re transforming your home theater or refining your music setup, the K1 AV promises to deliver immersive soundscapes that bring your entertainment to life.