T+A Elektroakustik K1 AV user manual Unwanted whistling sound from, Loudspeakers, Control commands

Page 53

Problem:

Unwanted whistling sound from the

 

loudspeakers.

Cause:

The aerial is too close to a mains cable or

 

Cinch inter-connect lead.

Remedy:

Re-position the cable an adequate distance

 

away. Use an external aerial or a cable

 

connection.

 

 

Problem:

The K1 AV responds correctly when the

 

front panel buttons are operated

 

manually, but does not react to remote

 

control commands.

Cause 1:

Incorrectly inserted batteries or flat

 

batteries in the remote control handset.

Remedy:

Re-install batteries correctly or fit new

 

ones.

Cause 2:

No visual contact between the remote

 

control transmitter and the K1 AV’s remote

 

control receiver.

Remedy:

Ensure direct line-of-sight contact between

 

remote control transmitter and receiver. Note

 

that glass doors may prevent the system

 

working properly.

 

Maximum range between transmitter and

 

receiver is approx. 6 metres.

 

Position the receiver in such a way that it is

 

not subjected to direct sunlight or strong

 

artificial lighting.

 

If you are using a supplementary remote

 

control receiver, this must also be set up in

 

a shaded position.

 

Fluorescent and energy-saving lamps are

 

powerful sources of interference.

Cause 3:

You are using the incorrect version of the

 

optional E2000 remote control receiver.

 

The correct receiver features two visible

 

screw-heads on the underside of the case.

 

 

Remedy:

Ask your specialist dealer for advice.

 

 

Cause 4:

The batteries in the remote control handset

 

have run flat, and the remote control

 

address has reverted to the default setting.

 

 

Remedy:

Change the remote control address of the

 

F6 handset.

 

 

Problem:

TUNER, CD player or recorder do not

 

respond to control commands.

Cause:

The machine you wish to operate is not

 

selected as the current listening source.

Remedy:

Press the corresponding source button on

 

the remote control handset, and try again.

 

 

Problem:

External devices (Hi-Fi equipment, TV

 

set, video recorder or similar) respond

 

to the signals from the F6 remote

 

control handset; alternatively the K1 AV

 

responds to remote control signals from

 

external devices.

Cause:

Only a limited number of remote control

 

codes are available, so it can occasionally

 

occur that systems respond incorrectly in

 

this way.

Remedy:

The F6 remote control handset and the

 

K1 AV can be set to an alternative remote

 

control address. See the chapter 'Basic

 

settings / Installation / Using the K1 AV for

 

the first time, Switching the remote

 

control address').

 

 

53

Page 52 Page 54
Image 53
Page 52 Page 54
Contents USERK1MANUALAV Page Elektroakustik WelcomeK1 AV Following warning labels are attached to the machineAbout these instructions Symbols used in these instructionsContents Disc mode only  HeadphonesFront panel controls  Disc drawer Screen  Remote control of the K1 AV /  Disc mode Tuner mode/  Volume Switching onAmplifier Basic functionsAmplifier menu Multi-room modeBass Norm Amplifier menuOperation ExplanationBass Norm Amplifier menu point Sub-woofer volume SwlevBasic operation TunerProgramming the Timer Alarm TimerSwitching the Timer off Special Tuner functionsTuner menu point Reception modes Rcvm Reception mode DisplayTunermenü P28 104,90 MHz Tuner menu point Automatic storing Autostore During playback Disc playerInserting and playing a disc Switch Cursor control off Switching to Cursor controlSpecial functions Manual Cursor controlJpeg / Picture CD Playing MP3 / Jpeg / Picture CDsCompatibility with recordable media Compatible formats Requirements regarding MP3 discs Audio formatsClosing the Setup menu Basic disc player settings SetupMenu Player SetupGeneral Setup Menu Night Mode Audio-Setup MenuAnalogue Output CD UpsamplingSound Mode Digital AUDIO-SETUPDigital Output Lpcm outputTV Display Video SetupTV Type Progressive Picture SettingComponent  Important noteBasic settings Page Safety notes Trouble-shooting Glossary Specification Amplifier Setup Menu Basic settings menu Amplifier Setup Menu Main Sat Vol a/b = darkest stage 10-25 CLK Time RDSAUX MIN Page  A Sockets B Setting up the K1 AV TV  RC in E2000Loudspeaker cables, signal leads WiringMains cables, mains filters Care of the unitSwitching the remote control address F6 Remote Control HandsetReplacing the batteries  Disposal of exhausted batteriesWiring diagram Safety Notes Device approval and conformity with EU directives Approved usageAttenuator = aerial signal reducer Amplifier Setup MenuBass management Cable networkPreset = station memory Loudspeaker configurationDisc menu, DVD menu Field strengthUpdate Stand-by modeSearch threshold Source device, listening sourcebutton do not light up K1 AV does not switch on screenNo sound No sound from the centre loudspeakerRespond to control commands Control commandsTo the signals from the F6 remote Responds to remote control signals fromDisc player TunerPage Amplifier section accessories AccessoriesCD/DVD player Special functionsHerford Deutschland * Germany

K1 AV specifications

T+A Elektroakustik, a prominent German manufacturer renowned for its high-fidelity audio equipment and innovative technologies, has made significant strides in the audio world with its K1 AV model. This all-in-one stereo receiver is a perfect blend of advanced technology and exemplary craftsmanship, making it a standout choice for discerning audiophiles seeking performance and versatility in one compact unit.

The K1 AV is designed to deliver remarkable audio quality, benefitting from T+A's rich experience in engineering and sound reproduction. This device serves as a multi-functional hub, supporting multiple audio formats and connectivity options to meet the diverse needs of modern consumers. One of its standout features is the high-resolution audio support, capable of playing back lossless formats, allowing listeners to experience their music with stunning clarity and detail.

At the heart of the K1 AV lies the use of high-quality components, including a state-of-the-art DAC (digital-to-analog converter), which ensures optimal sound reproduction across a wide frequency range. The amplification section is designed to preserve the integrity of the audio signal while providing ample power to drive various speakers. This attention to detail guarantees a engaging listening experience, whether you are watching movies, enjoying your favorite music, or gaming.

In terms of connectivity, the K1 AV is equipped with an array of inputs and outputs, including Bluetooth, USB, optical, and coaxial connections, making it compatible with a diverse range of sources. The inclusion of HDMI ARC allows for seamless integration with televisions and other devices, enhancing the overall audio experience in home theater setups.

Another remarkable aspect of the K1 AV is its user-friendly interface, with intuitively designed controls and a vibrant display that simplifies operation. T+A's commitment to quality is also evident in the build design, featuring a robust chassis that minimizes vibrations and interference, further enhancing audio performance.

Moreover, the K1 AV supports various streaming services, allowing users to enjoy their favorite music from platforms such as Spotify and Tidal effortlessly. The device’s modern design and premium aesthetics will seamlessly blend into any living space, making it a striking addition to home decor.

In summary, the T+A Elektroakustik K1 AV is a finely engineered audio powerhouse, catering to both music enthusiasts and casual listeners alike. With its exceptional sound quality, versatile connectivity options, and elegant design, the K1 AV stands out as a premier choice for those looking to elevate their audio experience. Whether you’re transforming your home theater or refining your music setup, the K1 AV promises to deliver immersive soundscapes that bring your entertainment to life.
Top Page Image Contents