Bosch Appliances 3922 988 43318 Connecting peripheral equipment to the CCU, Signal +, Symmetrical

Digital Congress Network Installation and Operating Manual Chapter 4 - Central Control Equipment en 4-11

4.8 Connecting peripheral equipment to the CCU This section of the page has been left blank intentionally

The Central Control Unit can connect to the following external equipment:

•Recording equipment (Recording floor only)

•Public address system

•Telephone coupler

•Mixing desk

The interconnection facilities located at the rear of the unit (FIG 4-7) are as follows:

1.Two Cinch-type sockets, Input (In) and Output (Out) for connection to a tape/cassette recorder (Rec.).

2.Two cinch-type sockets for Asymmetrical line Input (In).

3.Two cinch-type sockets for Symmetrical/Asymmetrical line Output (Out).

Port 1		Rec.	Line		Trunk
	In		In
Port 2	Out		Out
			Symmetrical
				2	Cinch socket
	Rec.	Line
	In		In		Signal +
1	Out		Out
					Screen
		Symmetrical
			3

FIG 4-7 Connecting peripheral equipment

Bosch Security Systems 04-2003 3922 988 43318 en Connecting peripheral equipment to the CCU